About Sumter County Fire and EMS Frequencies
- Trunked radio systems that carry fire and EMS traffic here: Sumter County Public Safety System: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- 4 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Sumter County trunked talkgroups
Sumter County Public Safety System
4 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sumter County Fire | Sumter County Fire – Dispatch | 1102 | 44e | D Encrypted |
| Sumter County Fire | Sumter County Fire – Fire Ground | 1104 | 450 | D Encrypted |
| Sumter County Hospital | Sumter County Hospital – Villages Hospital | 1108 | 454 | D Encrypted |
| Sumter County Hospital | EMS-Hospital | 1115 | 45b | D Encrypted |
Radio system sites in Sumter County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Sumter County
Common questions
Do fire departments and EMS use a trunked radio system in Sumter County?
Yes. Fire and EMS talkgroups are listed for Sumter County Public Safety System: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Sumter County?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Sumter County?
For Sumter County, start with the Countywide Simulcast site of Sumter County Public Safety System. Its control channels are 852.9, 853.2, 853.5125, 853.5875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Sumter County fire and EMS talkgroups encrypted?
4 of the 4 talkgroups listed for Sumter County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.