Skip to content

The Villages Fire and EMS Frequencies

We do not have frequencies listed specifically for The Villages in Sumter County, Florida yet. Countywide channels for Sumter County that may also cover this area are shown below when we have them. The closest trunked radio site we have is The Villages (Sumter County Public Safety System), about 4 miles away.

The Villages also extends into Marion County.

About The Villages Fire and EMS Frequencies

  • Trunked radio systems that carry fire and EMS traffic here: Sumter County Public Safety System: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For The Villages, start with the The Villages site of Sumter County Public Safety System, about 4 miles away. Its control channels: 853.1375, 853.3, 853.625 MHz.
  • 4 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Sumter County channels that also cover The Villages

Sumter County Public Safety System

4 encrypted talkgroups (cannot be monitored)
Sumter County Public Safety System encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Sumter County FireSumter County Fire – Dispatch110244eD Encrypted
Sumter County FireSumter County Fire – Fire Ground1104450D Encrypted
Sumter County HospitalSumter County Hospital – Villages Hospital1108454D Encrypted
Sumter County HospitalEMS-Hospital111545bD Encrypted

Nearest trunked radio sites

Distances are measured from the center of The Villages.

The Villages · Sumter County Public Safety System
RFSS 1 · Site 2 (hex 2) · NAC 4E0 · about 4 mi away
Control 853.1375, 853.3, 853.625, 853.8625
Voice 852.15, 852.65
Ormond · Statewide Law Enforcement Radio System (EDACS)
Site 53 (hex 35) · about 10 mi away
Control 854.1625
Voice 851.95, 852.45, 852.95, 854.125, 854.4375
Countywide Simulcast · Sumter County Public Safety System
RFSS 1 · Site 1 (hex 1) · NAC 4E6 · about 14 mi away
Control 852.9, 853.2, 853.5125, 853.5875
Voice 851.0375, 851.4, 851.5375, 851.8375, 852.0875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in The Villages?

Yes. The county-level systems that cover The Villages are Fire and EMS talkgroups are listed for Sumter County Public Safety System: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in The Villages?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in The Villages?

For The Villages, start with the The Villages site of Sumter County Public Safety System. Its control channels are 853.1375, 853.3, 853.625, 853.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.