Skip to content

Box Springs Fire and EMS Frequencies

We do not have frequencies listed specifically for Box Springs in Talbot County, Georgia yet. Countywide channels for Talbot County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Columbus (Muscogee County Government (GA)), about 13 miles away.

About Box Springs Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Box Springs: Talbot County Fire 154.1450 MHz, narrow FM, CSQ. County-level ems dispatch that covers Box Springs: Talbot County EMS 156.2250 MHz, narrow FM, 162.2 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Talbot County channels that also cover Box Springs

Fire Dispatch

Fire Dispatch frequencies for Talbot County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Talbot County FireTalbot County Fire – Dispatch154.1450
In 150.8050
CSQFMNWXF967

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Talbot County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Talbot County FireVolunteer Fire155.5500
In 151.4150
225.7 PLFMNWQOQ356

EMS Dispatch

EMS Dispatch frequencies for Talbot County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Talbot County EMSTalbot County EMS – Dispatch156.2250
In 153.9800
162.2 PLFMNWQNC354

Nearest trunked radio sites

Distances are measured from the center of Box Springs.

Columbus · Muscogee County Government (GA)
RFSS 7 · Site 3 (hex 3) · NAC 393 · about 13 mi away
Control 851.6125, 852.0875, 852.1125, 852.375
Voice 852.8375, 853.1375, 853.1625, 853.825, 854.0875, 854.4375, 854.7375, 854.9875, 855.3875, 855.5125, 855.7125, 855.9875, 856.3125, 856.4375, 856.7125, 856.8875, 856.9875, 857.3375, 857.4625
Plains · Sumter County Public Safety
Site 3 (hex 3) · about 38 mi away
Control 151.25
Voice 151.1075, 159.0975, 159.1725
Americus · Sumter County Public Safety
Site 1 (hex 1) · about 39 mi away
Control 151.355
Voice 151.0025, 154.055, 154.3325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Box Springs?

We do not have a fire dispatch channel listed specifically for Box Springs. The county-level fire dispatch channels in the same county: Talbot County Fire 154.1450 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Box Springs?

We do not have a EMS dispatch channel listed specifically for Box Springs. The county-level EMS dispatch channels in the same county: Talbot County EMS 156.2250 MHz, narrow FM, 162.2 PL.

What scanner do I need to listen to fire and EMS in Box Springs?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Box Springs?

For Box Springs, start with the Columbus site of Muscogee County Government (GA). Its control channels are 851.6125, 852.0875, 852.1125, 852.375 MHz. Program a control channel first; the scanner finds the voice channels from it.