About Tate City Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Tate City: Towns County Fire 154.4150 MHz, NXDN48, RAN 25. County-level ems dispatch that covers Tate City: Towns County EMS 154.1000 MHz, NXDN48, RAN 25.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Towns County channels that also cover Tate City
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Towns County Fire | Towns County Fire – Dispatch | 154.4150 In 153.8900 | RAN 25 | NXDN48 | WNNA888 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Towns County EMS | Towns County EMS – Dispatch | 154.1000 In 150.8050 | RAN 25 | NXDN48 | WPNR411 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Towns County EMS | Towns County EMS – Alternate | 151.3025 In 155.6775 | FMN | WPNR411 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Towns County Hospital | Chatuge Regional Hospital EMS Reports | 155.3400 | FMN | WNWU355 | |
| Towns County Hospital | Chatuge Regional Hospital | 155.4000 | FMN | WNWU355 |
Nearest trunked radio sites
Distances are measured from the center of Tate City.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Tate City?
We do not have a fire dispatch channel listed specifically for Tate City. The county-level fire dispatch channels in the same county: Towns County Fire 154.4150 MHz, NXDN48, RAN 25.
What frequency does EMS or the ambulance service use in Tate City?
We do not have a EMS dispatch channel listed specifically for Tate City. The county-level EMS dispatch channels in the same county: Towns County EMS 154.1000 MHz, NXDN48, RAN 25.
What scanner do I need to listen to fire and EMS in Tate City?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Tate City?
For Tate City, start with the Habersham Co Simulcast site of Northeast Georgia Area Regional Radio Network. Its control channels are 854.5, 854.875, 856.225, 856.475 MHz. Program a control channel first; the scanner finds the voice channels from it.