Skip to content

Squaw Grove Fire and EMS Frequencies

We do not have frequencies listed specifically for Squaw Grove in DeKalb County, Illinois yet. Countywide channels for DeKalb County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (DeKalb County Public Safety), about 11 miles away.

About Squaw Grove Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Squaw Grove: DeKalb County Fire 153.4850 MHz, narrow FM, 192.8 PL. Trunked: DeKalb County Public Safety, for example DeKalb County Fire talkgroup 28 (hex 1c).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: DeKalb County Public Safety: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Squaw Grove, start with the Simulcast site of DeKalb County Public Safety, about 11 miles away. Its control channels: 769.83125, 770.30625, 771.50625 MHz.

Data updated .

DeKalb County channels that also cover Squaw Grove

Fire Dispatch

Fire Dispatch frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
DeKalb County FireDeKalb County Fire – Dispatch – Countywide (Channel 1)153.4850
In 159.0150
192.8 PLFMNWPJP732
DeKalb County FireDeKalb County Fire – Backup (Channel 2) / Law – Backup to SC21154.8600
In 155.9700
141.3 PLFMNWPXU646

Fire Ground / Tactical

Fire Ground / Tactical frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
DeKalb County FireDeKalb County Fire – Main/Fireground; Outdoor Warning Siren System154.0700CSQFMNKAS657

Hospitals & Medical

Hospitals & Medical frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kishwaukee Community Hospital (DeKalb)Patient Reports155.340088.5 PLFMNWRVU491
Kishwaukee Community Hospital (DeKalb)Patient Reports463.0000
In 468.0000
103.5 PLFMNWQCJ679
Valley West Community Hospital (Sandwich)Patient Reports155.340091.5 PLFMNWPRF621

DeKalb County Public Safety

DeKalb County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
DeKalb County FireDeKalb County Fire – Dispatch – Patch (of 153.485)281cT
DeKalb County FireDeKalb County Fire – County Fire 2 Patch/Law291dT
DeKalb County FireIFERN Patch164a4T

Nearest trunked radio sites

Distances are measured from the center of Squaw Grove.

Simulcast · DeKalb County Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 890 · about 11 mi away
Control 769.83125, 770.30625, 771.50625, 771.83125, 772.10625
Voice 772.43125
DeKalb - City · STARCOM21 Statewide Illinois
RFSS 1 · Site 47 (hex 2F) · NAC 144 · about 12 mi away
Control 851.55, 851.8, 852.6
Voice 851.2, 854.3875, 854.9875, 856.4875
Aurora Simulcast · Aurora Public Safety (P25)
Project 25 · RFSS 53 · Site 1 (hex 1) · NAC 032 · about 18 mi away
Control 770.51875, 771.20625, 771.59375, 772.20625, 772.54375, 773.18125, 774.68125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Squaw Grove?

We do not have a fire dispatch channel listed specifically for Squaw Grove. The county-level fire dispatch channels in the same county: DeKalb County Fire 153.4850 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Squaw Grove?

Yes. The county-level systems that cover Squaw Grove are Fire and EMS talkgroups are listed for DeKalb County Public Safety: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Squaw Grove?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Squaw Grove?

For Squaw Grove, start with the Simulcast site of DeKalb County Public Safety. Its control channels are 769.83125, 770.30625, 771.50625, 771.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.