About Victor Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Victor: DeKalb County Fire 153.4850 MHz, narrow FM, 192.8 PL. Trunked: DeKalb County Public Safety, for example DeKalb County Fire talkgroup 28 (hex 1c).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: DeKalb County Public Safety: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Victor, start with the Simulcast site of DeKalb County Public Safety, about 16 miles away. Its control channels: 769.83125, 770.30625, 771.50625 MHz.
Data updated .
DeKalb County channels that also cover Victor
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb County Fire | DeKalb County Fire – Dispatch – Countywide (Channel 1) | 153.4850 In 159.0150 | 192.8 PL | FMN | WPJP732 |
| DeKalb County Fire | DeKalb County Fire – Backup (Channel 2) / Law – Backup to SC21 | 154.8600 In 155.9700 | 141.3 PL | FMN | WPXU646 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb County Fire | DeKalb County Fire – Main/Fireground; Outdoor Warning Siren System | 154.0700 | CSQ | FMN | KAS657 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kishwaukee Community Hospital (DeKalb) | Patient Reports | 155.3400 | 88.5 PL | FMN | WRVU491 |
| Kishwaukee Community Hospital (DeKalb) | Patient Reports | 463.0000 In 468.0000 | 103.5 PL | FMN | WQCJ679 |
| Valley West Community Hospital (Sandwich) | Patient Reports | 155.3400 | 91.5 PL | FMN | WPRF621 |
DeKalb County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| DeKalb County Fire | DeKalb County Fire – Dispatch – Patch (of 153.485) | 28 | 1c | T |
| DeKalb County Fire | DeKalb County Fire – County Fire 2 Patch/Law | 29 | 1d | T |
| DeKalb County Fire | IFERN Patch | 164 | a4 | T |
Nearest trunked radio sites
Distances are measured from the center of Victor.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Victor?
We do not have a fire dispatch channel listed specifically for Victor. The county-level fire dispatch channels in the same county: DeKalb County Fire 153.4850 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Victor?
Yes. The county-level systems that cover Victor are Fire and EMS talkgroups are listed for DeKalb County Public Safety: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Victor?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Victor?
For Victor, start with the Simulcast site of DeKalb County Public Safety. Its control channels are 769.83125, 770.30625, 771.50625, 771.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.