Skip to content

Boulder Hill Fire and EMS Frequencies

We do not have frequencies listed specifically for Boulder Hill in Kendall County, Illinois yet. Countywide channels for Kendall County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Aurora Simulcast (Aurora Public Safety (P25)), about 3 miles away.

About Boulder Hill Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Boulder Hill: KenCom Fire 154.1525 MHz, narrow FM, 162.2 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Kendall County channels that also cover Boulder Hill

Fire Dispatch

Fire Dispatch frequencies for Kendall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
KenCom FireKenCom Fire – Backup154.1525
In 159.0675
162.2 PLFMNWQNN991
KenCom FireKenCom Fire – Dispatch155.5425
In 153.8675
167.9 PLFMNWQNN991

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Kendall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
KenCom FireKenCom Fire – High Risk Operations154.4075
In 159.0375
NAC 611P25 EncryptedWRHV827

Nearest trunked radio sites

Distances are measured from the center of Boulder Hill.

Aurora Simulcast · Aurora Public Safety (P25)
Project 25 · RFSS 53 · Site 1 (hex 1) · NAC 032 · about 3 mi away
Control 770.51875, 771.20625, 771.59375, 772.20625, 772.54375, 773.18125, 774.68125
Kane County - Simulcast · STARCOM21 Statewide Illinois
RFSS 1 · Site 26 (hex 1A) · NAC 140 · about 6 mi away
Control 853.9375, 855.7375, 856.7375, 856.9875
Voice 851.325, 851.6625, 852.4125, 852.9125, 853.4125, 853.625, 854.2875, 855.4875
Naperville - Simulcast · Naperville Public Safety (P25)
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC CC0 · about 9 mi away
Control 852.2, 853.15, 853.65, 855.6875
Voice 851.2375, 851.625, 857.0125, 858.0125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Boulder Hill?

We do not have a fire dispatch channel listed specifically for Boulder Hill. The county-level fire dispatch channels in the same county: KenCom Fire 154.1525 MHz, narrow FM, 162.2 PL.

What scanner do I need to listen to fire and EMS in Boulder Hill?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Boulder Hill?

For Boulder Hill, start with the Aurora Simulcast site of Aurora Public Safety (P25). Its control channels are 770.51875, 771.20625, 771.59375, 772.20625 MHz. Program a control channel first; the scanner finds the voice channels from it.