About Na-Au-Say Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Na-Au-Say: KenCom Fire 154.1525 MHz, narrow FM, 162.2 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Kendall County channels that also cover Na-Au-Say
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| KenCom Fire | KenCom Fire – Backup | 154.1525 In 159.0675 | 162.2 PL | FMN | WQNN991 |
| KenCom Fire | KenCom Fire – Dispatch | 155.5425 In 153.8675 | 167.9 PL | FMN | WQNN991 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| KenCom Fire | KenCom Fire – High Risk Operations | 154.4075 In 159.0375 | NAC 611 | P25 Encrypted | WRHV827 |
Nearest trunked radio sites
Distances are measured from the center of Na-Au-Say.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Na-Au-Say?
We do not have a fire dispatch channel listed specifically for Na-Au-Say. The county-level fire dispatch channels in the same county: KenCom Fire 154.1525 MHz, narrow FM, 162.2 PL.
What scanner do I need to listen to fire and EMS in Na-Au-Say?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Na-Au-Say?
For Na-Au-Say, start with the Will/Grundy Co Simulcast site of STARCOM21 Statewide Illinois. Its control channels are 770.90625, 773.33125, 774.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.