Skip to content

Alto Fire and EMS Frequencies

We do not have frequencies listed specifically for Alto in Lee County, Illinois yet. Countywide channels for Lee County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Creston (STARCOM21 Statewide Illinois), about 4 miles away.

About Alto Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Alto: Lee County Fire 154.1900 MHz, narrow FM, CSQ; Ogle-Lee Fire Protection District 154.1600 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Alto: Advance EMS of Dixon 155.2200 MHz, narrow FM, 151.4 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Lee County channels that also cover Alto

Fire Dispatch

Fire Dispatch frequencies for Lee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lee County FireLee County Fire – Dispatch / Tone-Outs / Operations154.1900CSQFMNWPVK584
Ogle-Lee Fire Protection DistrictOgle-Lee Fire Protection District – Dispatch – Rochelle/Ogle-Lee Fire Protection154.1600156.7 PLFMNWQUT208

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Lee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ogle-Lee Fire Protection DistrictOgle-Lee Fire Protection District – Fire Ground /Local154.1750FMNWPRF283

EMS Dispatch

EMS Dispatch frequencies for Lee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Advance EMS of DixonAdvance EMS of Dixon – Dispatch155.2200151.4 PLFMNWNUK948

Hospitals & Medical

Hospitals & Medical frequencies for Lee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Katherine Shaw Bethea Hospital (Dixon)Patient Reports155.3400151.4 PLFMNWNBE757

Nearest trunked radio sites

Distances are measured from the center of Alto.

Creston · STARCOM21 Statewide Illinois
RFSS 1 · Site 36 (hex 24) · NAC 149 · about 4 mi away
Control 773.15625, 773.56875, 774.59375
Voice 770.16875, 773.73125, 774.81875
Simulcast · DeKalb County Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 890 · about 11 mi away
Control 769.83125, 770.30625, 771.50625, 771.83125, 772.10625
Voice 772.43125
DeKalb - City · STARCOM21 Statewide Illinois
RFSS 1 · Site 47 (hex 2F) · NAC 144 · about 12 mi away
Control 851.55, 851.8, 852.6
Voice 851.2, 854.3875, 854.9875, 856.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Alto?

We do not have a fire dispatch channel listed specifically for Alto. The county-level fire dispatch channels in the same county: Lee County Fire 154.1900 MHz, narrow FM, CSQ; Ogle-Lee Fire Protection District 154.1600 MHz, narrow FM, 156.7 PL.

What frequency does EMS or the ambulance service use in Alto?

We do not have a EMS dispatch channel listed specifically for Alto. The county-level EMS dispatch channels in the same county: Advance EMS of Dixon 155.2200 MHz, narrow FM, 151.4 PL.

What scanner do I need to listen to fire and EMS in Alto?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Alto?

For Alto, start with the Creston site of STARCOM21 Statewide Illinois. Its control channels are 773.15625, 773.56875, 774.59375 MHz. Program a control channel first; the scanner finds the voice channels from it.