Skip to content

Cable Fire and EMS Frequencies

We do not have frequencies listed specifically for Cable in Mercer County, Illinois yet. Countywide channels for Mercer County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Andover (STARCOM21 Statewide Illinois), about 11 miles away.

About Cable Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cable: Mercer County Fire 154.1900 MHz, narrow FM, no tone.

  • 14 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Mercer County channels that also cover Cable

Fire Dispatch

Fire Dispatch frequencies for Mercer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mercer County FireMercer County Fire – Countywide Dispatch – Old154.1900FMNWQME537
Mercer County FireMercer County Fire – Seaton154.3850
In 150.7900
103.5 PLFMNWPEH964
Mercer County FireMercer County Fire – Reynolds154.3850
In 150.7900
107.2 PLFMNWPEH964
Mercer County FireMercer County Fire – New Boston EMS, Joy154.3850
In 150.7900
114.8 PLFMNWPEH964
Mercer County FireMercer County Fire – Matherville, Viola154.3850
In 150.7900
146.2 PLFMNWPEH964
Mercer County FireMercer County Fire – Aledo, Eliza, Medic 1 EMS154.3850
In 150.7900
151.4 PLFMNWPEH964
Mercer County FireMercer County Fire – Sherrard154.3850
In 150.7900
179.9 PLFMNWPEH964
Mercer County FireMercer County Fire – New Boston154.3850
In 150.7900
203.5 PLFMNWPEH964
Mercer County FireMercer County Fire – Keithsburg154.3850
In 150.7900
123.0 PLFMN—
Mercer County FireMercer County Fire – Alexis, Burgress154.3850
In 150.7900
91.5 PLFMN—
Mercer County FireMercer County Fire – New Windsor154.3850
In 150.7900
110.9 PLFMN—

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Mercer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
New Boston-Eliza FireNew Boston-Eliza Fire – Local154.2950FMNWPUC608

EMS Tactical

EMS Tactical frequencies for Mercer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Genesis Medical Center-Aledo / Genesis AmbulancePatient Reports155.2200FMNKNAB943

Hospitals & Medical

Hospitals & Medical frequencies for Mercer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Genesis Medical Center-Aledo / Genesis AmbulancePatient Reports155.3400225.7 PLFMNKNAB943

Nearest trunked radio sites

Distances are measured from the center of Cable.

Andover · STARCOM21 Statewide Illinois
RFSS 2 · Site 39 (hex 27) · NAC 14D · about 11 mi away
Control 852.9625, 853.4875
Voice 852.4375, 858.2125
Moline 700 · STARCOM21 Statewide Illinois
RFSS 2 · Site 46 (hex 2E) · NAC 142 · about 13 mi away
Control 770.71875
Voice 770.21875, 773.79375
Rock Island · STARCOM21 Statewide Illinois
RFSS 2 · Site 43 (hex 2B) · NAC 146 · about 13 mi away
Control 852.325
Voice 851.4875, 852.85, 853.375, 853.95
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cable?

We do not have a fire dispatch channel listed specifically for Cable. The county-level fire dispatch channels in the same county: Mercer County Fire 154.1900 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Cable?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Cable?

For Cable, start with the Andover site of STARCOM21 Statewide Illinois. Its control channels are 852.9625, 853.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.