About Richland Grove Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Richland Grove: Mercer County Fire 154.1900 MHz, narrow FM, no tone.
- 14 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Mercer County channels that also cover Richland Grove
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mercer County Fire | Mercer County Fire – Countywide Dispatch – Old | 154.1900 | FMN | WQME537 | |
| Mercer County Fire | Mercer County Fire – Seaton | 154.3850 In 150.7900 | 103.5 PL | FMN | WPEH964 |
| Mercer County Fire | Mercer County Fire – Reynolds | 154.3850 In 150.7900 | 107.2 PL | FMN | WPEH964 |
| Mercer County Fire | Mercer County Fire – New Boston EMS, Joy | 154.3850 In 150.7900 | 114.8 PL | FMN | WPEH964 |
| Mercer County Fire | Mercer County Fire – Matherville, Viola | 154.3850 In 150.7900 | 146.2 PL | FMN | WPEH964 |
| Mercer County Fire | Mercer County Fire – Aledo, Eliza, Medic 1 EMS | 154.3850 In 150.7900 | 151.4 PL | FMN | WPEH964 |
| Mercer County Fire | Mercer County Fire – Sherrard | 154.3850 In 150.7900 | 179.9 PL | FMN | WPEH964 |
| Mercer County Fire | Mercer County Fire – New Boston | 154.3850 In 150.7900 | 203.5 PL | FMN | WPEH964 |
| Mercer County Fire | Mercer County Fire – Keithsburg | 154.3850 In 150.7900 | 123.0 PL | FMN | — |
| Mercer County Fire | Mercer County Fire – Alexis, Burgress | 154.3850 In 150.7900 | 91.5 PL | FMN | — |
| Mercer County Fire | Mercer County Fire – New Windsor | 154.3850 In 150.7900 | 110.9 PL | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| New Boston-Eliza Fire | New Boston-Eliza Fire – Local | 154.2950 | FMN | WPUC608 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Genesis Medical Center-Aledo / Genesis Ambulance | Patient Reports | 155.2200 | FMN | KNAB943 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Genesis Medical Center-Aledo / Genesis Ambulance | Patient Reports | 155.3400 | 225.7 PL | FMN | KNAB943 |
Nearest trunked radio sites
Distances are measured from the center of Richland Grove.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Richland Grove?
We do not have a fire dispatch channel listed specifically for Richland Grove. The county-level fire dispatch channels in the same county: Mercer County Fire 154.1900 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Richland Grove?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Richland Grove?
For Richland Grove, start with the Andover site of STARCOM21 Statewide Illinois. Its control channels are 852.9625, 853.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.