Skip to content

Adams Fire and EMS Frequencies

We do not have frequencies listed specifically for Adams in Cass County, Indiana yet. Countywide channels for Cass County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Peru (Indiana Project Hoosier SAFE-T), about 9 miles away.

About Adams Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Adams: Cass County Fire 155.4300 MHz, narrow FM, 118.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Cass County Fire talkgroup 10069 (hex 2755).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Adams, start with the Peru site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 853.45, 853.975 MHz.

Data updated .

Cass County channels that also cover Adams

Fire Dispatch

Fire Dispatch frequencies for Cass County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cass County FireCass County Fire – Dispatch (County)155.4300
In 154.7700
118.8 PLFMNWPWS755

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cass County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams Township FireAdams Township Fire – Tactical153.9500FMNWPAG280
Cass County FireCass County Fire – Tactical Channel (County)154.3700FMNWNJB880
Cass County FireCass County Fire – Remote Link453.8500
In 458.8500
FMNKGS762
Harrison Township FireHarrison Township Fire – Tactical154.3850FMNWNKK848
New Waverly Fireground FireNew Waverly Fireground154.2650
In 155.9775
032 DPLFMNWPGY306

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Cass County FireCass County Fire – Dispatch (Countywide)100692755D
Cass County FireSouthern Cass Fire – Dispatch10299283bD
Cass County FireCass County Fire – Tactical Channel (Countywide)10062274eD
Cass County FireCass County Fire – Tactical Channel (Countywide)10063274fD
Cass County FireCass County Fire – Tactical Channel (Countywide)100642750D
Cass County FireCass County Fire – Tactical Channel (Countywide)100672753D
Cass County EMSCass County EMS – Operations100682754D

Nearest trunked radio sites

Distances are measured from the center of Adams.

Peru · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 21 (hex 15) · NAC 6BA · about 9 mi away
Control 853.45, 853.975
Voice 851.375, 851.4, 851.9, 852.425
Logansport · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 57 (hex 39) · NAC 6B7 · about 10 mi away
Control 857.4875, 859.2125
Voice 851.9875, 852.9, 853.4875, 858.9375
Rochester · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 48 (hex 30) · NAC 6BC · about 12 mi away
Control 853.4, 855.4875
Voice 851.4, 852.4
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Adams?

We do not have a fire dispatch channel listed specifically for Adams. The county-level fire dispatch channels in the same county: Cass County Fire 155.4300 MHz, narrow FM, 118.8 PL.

Do fire departments and EMS use a trunked radio system in Adams?

Yes. The county-level systems that cover Adams are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Adams?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Adams?

For Adams, start with the Peru site of Indiana Project Hoosier SAFE-T. Its control channels are 853.45, 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.