About Mexico Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Mexico: Miami County Fire 140.0500 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example Miami County Fire talkgroup 10994 (hex 2af2).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (P25, NXDN48), which needs a scanner that decodes those modes.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Mexico, start with the Peru site of Indiana Project Hoosier SAFE-T, about 3 miles away. Its control channels: 853.45, 853.975 MHz.
Data updated .
Miami County channels that also cover Mexico
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Miami County Fire | Grissom ARB Fire (Dispatch and Operations) | 140.0500 | FMN | — | |
| Miami County Fire | Grissom ARB Fire (Dispatch and Operations) | 140.0500 | NAC 293 | P25 | — |
| Miami County Fire | County Fire Dispatch | 154.4300 | 88.5 PL | FMN | KNNS698 |
| Miami County Fire | Converse Fire/EMS | 453.6500 In 458.6500 | 82.5 PL | FMN | WNSC287 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mexico Community Fire Association | Mexico Community Fire Association – Fire Ground /Tactical | 153.9950 | 88.5 PL | FMN | WPVC276 |
| Miami County Fire | Mutual Aid (Including Communications with Air EMS) | 154.2800 | CSQ | FMN | — |
| Pipe Creek Township Volunteer Fire (Bunker Hill) | Pipe Creek Township Volunteer Fire (Bunker Hill) – Tactical Channel | 154.4075 | 114.8 PL | FMN | WQEQ900 |
| Pipe Creek Township Volunteer Fire (Bunker Hill) | Pipe Creek Township Volunteer Fire (Bunker Hill) – Tactical Channel | 154.4075 | RAN 49 | NXDN48 | WQEQ900 |
| Pipe Creek Township Volunteer Fire (Bunker Hill) | Pipe Creek Township Volunteer Fire (Bunker Hill) – Dispatch | 154.4300 | 88.5 PL | FMN | KSG460 |
| Pipe Creek Township Volunteer Fire (Bunker Hill) | Repeater (input to 154.43) | 158.8800 | RAN 49 | NXDN48 | KSG460 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pipe Creek Township Volunteer Fire (Bunker Hill) | Fire Operations (input to 154.43) | 158.8800 | 88.5 PL | FMN | KSG460 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Miami County Fire | Miami County Fire – Dispatch | 10994 | 2af2 | D |
| Miami County Fire | Miami County Fire – Fire Ground | 10995 | 2af3 | D |
| Miami County Fire | Miami County Fire – Fire Ground | 10996 | 2af4 | D |
| Miami County Fire | Miami County Fire – Fire Ground | 10997 | 2af5 | D |
| Miami County EMS | Miami County EMS – Dispatch | 10991 | 2aef | D |
| Miami County EMS | Miami County EMS – Operations | 10992 | 2af0 | D |
Nearest trunked radio sites
Distances are measured from the center of Mexico.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Mexico?
We do not have a fire dispatch channel listed specifically for Mexico. The county-level fire dispatch channels in the same county: Miami County Fire 140.0500 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Mexico?
Yes. The county-level systems that cover Mexico are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Mexico?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25, NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Mexico?
For Mexico, start with the Peru site of Indiana Project Hoosier SAFE-T. Its control channels are 853.45, 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.