About Owen Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Owen: Clinton County Fire 153.2900 MHz, narrow FM, 365 DPL; Emergency Management/Fire/EMS 154.2200 MHz, narrow FM, 192.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Clinton County Fire talkgroup 10100 (hex 2774).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Owen, start with the Geetingsville site of Indiana Project Hoosier SAFE-T, about 3 miles away. Its control channels: 852.95, 853.95 MHz.
Data updated .
Clinton County channels that also cover Owen
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton County Fire | Clinton County Fire – Dispatch (Rebroadcast of SAFE-T) | 153.2900 | 365 DPL | FMN | WPPB519 |
| Emergency Management/Fire/EMS | Emergency Management/Fire/EMS – Dispatch – Countywide (Multicast of SAFE-T) | 154.2200 | 192.8 PL | FMN | KBR865 |
| Emergency Management/Fire/EMS Unconfirmed | Emergency Management/Fire/EMS – Remote Link | 453.0375 In 458.0375 | FMN | WQMR282 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Management/Fire/EMS | Rossville Fire – Secondary | 154.0400 | FMN | KNNP729 | |
| Emergency Management/Fire/EMS | [BACKUP) Emergency Management | 155.8350 In 155.1450 | 110.9 PL | FMN | KZZ773 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Management/Fire/EMS | Emergency Management/Fire/EMS – Operations – Countywide | 155.3850 | CSQ | FMN | KZJ503 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clinton County Fire | Clinton County Fire – Dispatch (County) | 10100 | 2774 | D |
| Clinton County Fire | Clinton County Fire – Operations (County) | 10101 | 2775 | D |
| Clinton County Fire | Clinton County Fire – Operations (County) | 10102 | 2776 | D |
| Clinton County Fire | Clinton County Fire – Operations (County) | 10103 | 2777 | D |
| Clinton County Fire | Clinton County Fire – Operations (County) | 10104 | 2778 | D |
| Clinton County Fire | Clinton County Fire – Talk-Around (County) | 10105 | 2779 | D |
| Clinton County EMS | Clinton County EMS – Operations (County) | 10099 | 2773 | D |
Nearest trunked radio sites
Distances are measured from the center of Owen.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Owen?
We do not have a fire dispatch channel listed specifically for Owen. The county-level fire dispatch channels in the same county: Clinton County Fire 153.2900 MHz, narrow FM, 365 DPL; Emergency Management/Fire/EMS 154.2200 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Owen?
Yes. The county-level systems that cover Owen are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Owen?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Owen?
For Owen, start with the Geetingsville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.95, 853.95 MHz. Program a control channel first; the scanner finds the voice channels from it.