About Clinton Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Clinton: Decatur County Public Safety 154.3850 MHz, narrow FM, 85.4 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Decatur County Fire talkgroup 21137 (hex 5291).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Clinton, start with the Greensburg site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 852.9125, 853.4125 MHz.
Data updated .
Decatur County channels that also cover Clinton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Decatur County Public Safety | Fire/EMS Dispatch | 154.3850 In 153.9500 | 85.4 PL | FMN | WNNI403 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Decatur County Fire | Decatur County Fire – Dispatch | 21137 | 5291 | D |
| Decatur County Fire | Decatur County Fire – Fire Ground | 21138 | 5292 | D |
| Decatur County Fire | Decatur County Fire – Fire Ground | 21139 | 5293 | D |
| Decatur County Fire | Decatur County Fire – Fire Ground | 21140 | 5294 | D |
| Decatur County Fire | Decatur County Fire – Fire Ground | 21141 | 5295 | D |
| Decatur County EMS | Decatur County EMS – Tactical Channel | 21147 | 529b | D |
Nearest trunked radio sites
Distances are measured from the center of Clinton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Clinton?
We do not have a fire dispatch channel listed specifically for Clinton. The county-level fire dispatch channels in the same county: Decatur County Public Safety 154.3850 MHz, narrow FM, 85.4 PL.
Do fire departments and EMS use a trunked radio system in Clinton?
Yes. The county-level systems that cover Clinton are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Clinton?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Clinton?
For Clinton, start with the Greensburg site of Indiana Project Hoosier SAFE-T. Its control channels are 852.9125, 853.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.