About Orange Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Orange: Anderson Township (Milroy) 151.5350 MHz, NXDN48, RAN 40; Rush County Fire 154.3550 MHz, narrow FM, 131.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Rush County Fire talkgroup 12187 (hex 2f9b).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Orange, start with the Rushville site of Indiana Project Hoosier SAFE-T, about 11 miles away. Its control channels: 852.9625, 853.4625 MHz.
Data updated .
Rush County channels that also cover Orange
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Anderson Township (Milroy) | Anderson Township (Milroy) – Tone-Outs | 151.5350 In 155.0625 | RAN 40 | NXDN48 | WNWJ929 |
| Rush County Fire | Rush County Fire – Dispatch | 154.3550 | 131.8 PL | FMN | KVC540 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rush County Fire | Rush County Fire – Fire Ground | 154.1600 | CSQ | FMN | KUZ682 |
| Rushville Township Fire | Rushville Township Fire – Fire Ground | 154.2650 | FMN | WQGI878 | |
| Rushville Township Fire | Rushville Township Fire – Fire Ground | 159.3600 | FMN | WQGI878 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rush County Fire | County Fire – Dispatch | 12187 | 2f9b | D |
| Rush County Fire | County Fireground | 12188 | 2f9c | D |
| Rush County Fire | County Fireground | 12189 | 2f9d | D |
| Rush County Fire | County Fireground | 12190 | 2f9e | D |
| Rush County Fire | County Fireground | 12191 | 2f9f | D |
| Rush County EMS | County EMS – Operations | 12183 | 2f97 | D |
Nearest trunked radio sites
Distances are measured from the center of Orange.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Orange?
We do not have a fire dispatch channel listed specifically for Orange. The county-level fire dispatch channels in the same county: Anderson Township (Milroy) 151.5350 MHz, NXDN48, RAN 40; Rush County Fire 154.3550 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Orange?
Yes. The county-level systems that cover Orange are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Orange?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Orange?
For Orange, start with the Rushville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.9625, 853.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.