Skip to content

Manilla Fire and EMS Frequencies

Manilla in Rush County, Indiana has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Shelby Co Simulcast (Indiana Project Hoosier SAFE-T), about 9 miles away.

About Manilla Fire and EMS Frequencies

Quick answer: Fire dispatch for Manilla: Manilla Fire 151.3550 MHz, NXDN48, RAN 40 (expired). Trunked: Indiana Project Hoosier SAFE-T, for example Rush County Fire talkgroup 12187 (hex 2f9b).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Manilla, start with the Shelby Co Simulcast site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 851.9375, 853.9375 MHz.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Manilla conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Manilla
AgencyDescriptionFrequency (MHz)ToneModeFCC
Manilla Fire Expired: Expired 7/21Manilla Fire – Dispatch /Response151.3550
In 155.0625
RAN 40NXDN48WNWJ929

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Manilla
AgencyDescriptionFrequency (MHz)ToneModeFCC
Manilla FireManilla Fire – Fire Ground154.1600FMNKUZ682

Rush County channels that also cover Manilla

Fire Dispatch

Fire Dispatch frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anderson Township (Milroy)Anderson Township (Milroy) – Tone-Outs151.5350
In 155.0625
RAN 40NXDN48WNWJ929
Rush County FireRush County Fire – Dispatch154.3550131.8 PLFMNKVC540

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rush County FireRush County Fire – Fire Ground154.1600CSQFMNKUZ682
Rushville Township FireRushville Township Fire – Fire Ground154.2650FMNWQGI878
Rushville Township FireRushville Township Fire – Fire Ground159.3600FMNWQGI878

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Rush County FireCounty Fire – Dispatch121872f9bD
Rush County FireCounty Fireground121882f9cD
Rush County FireCounty Fireground121892f9dD
Rush County FireCounty Fireground121902f9eD
Rush County FireCounty Fireground121912f9fD
Rush County EMSCounty EMS – Operations121832f97D

Nearest trunked radio sites

Distances are measured from the center of Manilla.

Shelby Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 5 (hex 5) · NAC 6B5 · about 9 mi away
Control 851.9375, 853.9375
Voice 851.0625, 851.4375, 852.0625, 852.3125, 852.75, 853.75
Rushville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 76 (hex 4C) · NAC 6B9 · about 10 mi away
Control 852.9625, 853.4625
Voice 851.4875, 851.9625, 852.4625
Greenfield · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 74 (hex 4A) · NAC 6B4 · about 17 mi away
Control 854.2625, 854.4375
Voice 852.45, 853.05, 853.3, 853.575, 853.825, 854.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Manilla?

Fire dispatch channels listed for Manilla: Manilla Fire 151.3550 MHz, NXDN48, RAN 40 (expired).

Do fire departments and EMS use a trunked radio system in Manilla?

Yes. The county-level systems that cover Manilla are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Manilla?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Manilla?

For Manilla, start with the Shelby Co Simulcast site of Indiana Project Hoosier SAFE-T. Its control channels are 851.9375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Manilla fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Manilla are marked encrypted.