Skip to content

Posey Fire and EMS Frequencies

We do not have frequencies listed specifically for Posey in Rush County, Indiana yet. Countywide channels for Rush County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rushville (Indiana Project Hoosier SAFE-T), about 8 miles away.

About Posey Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Posey: Anderson Township (Milroy) 151.5350 MHz, NXDN48, RAN 40; Rush County Fire 154.3550 MHz, narrow FM, 131.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Rush County Fire talkgroup 12187 (hex 2f9b).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Posey, start with the Rushville site of Indiana Project Hoosier SAFE-T, about 8 miles away. Its control channels: 852.9625, 853.4625 MHz.

Data updated .

Rush County channels that also cover Posey

Fire Dispatch

Fire Dispatch frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anderson Township (Milroy)Anderson Township (Milroy) – Tone-Outs151.5350
In 155.0625
RAN 40NXDN48WNWJ929
Rush County FireRush County Fire – Dispatch154.3550131.8 PLFMNKVC540

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rush County FireRush County Fire – Fire Ground154.1600CSQFMNKUZ682
Rushville Township FireRushville Township Fire – Fire Ground154.2650FMNWQGI878
Rushville Township FireRushville Township Fire – Fire Ground159.3600FMNWQGI878

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Rush County FireCounty Fire – Dispatch121872f9bD
Rush County FireCounty Fireground121882f9cD
Rush County FireCounty Fireground121892f9dD
Rush County FireCounty Fireground121902f9eD
Rush County FireCounty Fireground121912f9fD
Rush County EMSCounty EMS – Operations121832f97D

Nearest trunked radio sites

Distances are measured from the center of Posey.

Rushville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 76 (hex 4C) · NAC 6B9 · about 8 mi away
Control 852.9625, 853.4625
Voice 851.4875, 851.9625, 852.4625
Knightstown · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 94 (hex 5E) · NAC 6B4 · about 11 mi away
Control 774.43125, 774.68125
Voice 769.81875, 770.26875, 770.81875, 771.54375
Greenfield · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 74 (hex 4A) · NAC 6B4 · about 13 mi away
Control 854.2625, 854.4375
Voice 852.45, 853.05, 853.3, 853.575, 853.825, 854.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Posey?

We do not have a fire dispatch channel listed specifically for Posey. The county-level fire dispatch channels in the same county: Anderson Township (Milroy) 151.5350 MHz, NXDN48, RAN 40; Rush County Fire 154.3550 MHz, narrow FM, 131.8 PL.

Do fire departments and EMS use a trunked radio system in Posey?

Yes. The county-level systems that cover Posey are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Posey?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Posey?

For Posey, start with the Rushville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.9625, 853.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.