About Waldron Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Waldron: Shelby County Fire 154.1600 MHz, narrow FM, 167.9 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Shelby County Fire talkgroup 12204 (hex 2fac).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Waldron, start with the Shelby Co Simulcast site of Indiana Project Hoosier SAFE-T, about 8 miles away. Its control channels: 851.9375, 853.9375 MHz.
Data updated .
Waldron conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Waldron Fire | Waldron Fire – Tactical Channel | 154.0700 | 192.8 PL | FMN | KJU299 |
Shelby County channels that also cover Waldron
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Shelby County Fire | Shelby County Fire – Dispatch | 154.1600 | 167.9 PL | FMN | KNCK900 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Shelby County Fire | Shelby County Fire – Tactical Channel (South of St Rd 44) | 154.2050 | 167.9 PL | FMN | KDG917 |
| Shelby County Fire | Shelby County Fire – Tactical Channel (North of St Rd 44) | 154.2200 | FMN | WNQG623 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Shelby County Fire | County Fire/EMS – Operations | 12204 | 2fac | D |
| Shelby County Fire | County Fire/EMS – Dispatch (Alerts only) | 12205 | 2fad | D |
| Shelby County Hospital | County Hospital Operations | 12218 | 2fba | D |
Nearest trunked radio sites
Distances are measured from the center of Waldron.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Waldron?
We do not have a fire dispatch channel listed specifically for Waldron. The county-level fire dispatch channels in the same county: Shelby County Fire 154.1600 MHz, narrow FM, 167.9 PL.
Do fire departments and EMS use a trunked radio system in Waldron?
Yes. The county-level systems that cover Waldron are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Waldron?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Waldron?
For Waldron, start with the Shelby Co Simulcast site of Indiana Project Hoosier SAFE-T. Its control channels are 851.9375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Waldron fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Waldron are marked encrypted.