Skip to content

Perry Fire and EMS Frequencies

We do not have frequencies listed specifically for Perry in Delaware County, Indiana yet. Countywide channels for Delaware County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Muncie (Indiana Project Hoosier SAFE-T), about 9 miles away.

About Perry Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Perry: Delaware County Fire/EMS 154.1900 MHz, narrow FM, 146.2 PL; Salem Township Fire 154.1900 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Perry: Delaware County Fire/EMS 155.2200 MHz, narrow FM, 146.2 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Delaware County Fire talkgroup 10174 (hex 27be).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Perry, start with the Muncie site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 852.95, 853.2625 MHz.

Data updated .

Delaware County channels that also cover Perry

Fire Dispatch

Fire Dispatch frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Delaware County Fire/EMSDelaware County Fire/EMS – Dispatch154.1900
In 159.0300
146.2 PLFMNWPLS714
Salem Township FireFire/EMS Dispatch154.1900146.2 PLFMNWQAW929

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Center TownshipCenter Township – Fire Ground153.7700FMWPSF575
Delaware County Fire/EMSCounty Emergency Services Dispatch155.4075
In 159.2925
FMNKAY939
Delaware County Fire/EMSAlternate Fire155.5950
In 159.0300
146.2 PLFMNKSB276
Hamilton Township Volunteer Fire DeptTactical Channel #2153.9500FMNWNLC230
Liberty Township Vol Fire DeptTactical Channel #3154.1300FMNKDK401
Mount Pleasant Township FireYorktown/Mt. Pleasant Twp. Fire154.2350FMNWPFV780

EMS Dispatch

EMS Dispatch frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Delaware County Fire/EMSDelaware County Fire/EMS – Dispatch155.2200146.2 PLFMNKAY939

EMS Tactical

EMS Tactical frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
IU Health Ball Memorial HospitalMedical Response Teams Paging460.3250
In 465.3250
FMNWPTS589

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Delaware County FireDelaware County Fire – Dispatch (Countywide)1017427beD
Delaware Muncie (18)Delaware Muncie (18) – Dispatch1015627acD
Delaware County FireDelaware County Fire – Fire Ground (Countywide)1017527bfD
Delaware County FireDelaware County Fire – Fire Ground (Countywide)1017627c0D
Delaware Muncie (18)Delaware Muncie (18) – Fire Ground1015727adD
Delaware Muncie (18)Delaware Muncie (18) – Fire Ground1015827aeD
Delaware Muncie (18)Delaware Muncie (18) – Fire Ground1015927afD
Delaware County EMSDelaware County EMS – Dispatch (Countywide)1014427a0D
Delaware County EMSDelaware County EMS – Tactical Channel (Countywide)1014627a2D
Delaware County HospitalDelaware County Hospital – IHERN (Countywide)1014527a1D

Nearest trunked radio sites

Distances are measured from the center of Perry.

Muncie · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 75 (hex 4B) · NAC 6B5 · about 9 mi away
Control 852.95, 853.2625
Voice 851.0125, 851.05, 851.175, 851.225, 851.3125, 851.6, 851.95, 852.1, 852.6375, 853.9875
Dalton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 31 (hex 1F) · NAC 6B1 · about 10 mi away
Control 852.9, 853.3875
Voice 851.3875, 851.825, 852.4125
INDOC New Castle · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 97 (hex 61) · NAC 6B0 · about 12 mi away
Control 858.2375, 859.2375
Voice 857.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Perry?

We do not have a fire dispatch channel listed specifically for Perry. The county-level fire dispatch channels in the same county: Delaware County Fire/EMS 154.1900 MHz, narrow FM, 146.2 PL; Salem Township Fire 154.1900 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Perry?

We do not have a EMS dispatch channel listed specifically for Perry. The county-level EMS dispatch channels in the same county: Delaware County Fire/EMS 155.2200 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Perry?

Yes. The county-level systems that cover Perry are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Perry?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Perry?

For Perry, start with the Muncie site of Indiana Project Hoosier SAFE-T. Its control channels are 852.95, 853.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.