Skip to content

Stoney Creek Fire and EMS Frequencies

We do not have frequencies listed specifically for Stoney Creek in Randolph County, Indiana yet. Countywide channels for Randolph County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Randolph County Government), about 8 miles away.

About Stoney Creek Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Stoney Creek: Randolph County Fire 154.1300 MHz, narrow FM, 114.8 PL. County-level ems dispatch that covers Stoney Creek: Culberson Ambulance Service 155.2350 MHz, FM, 114.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Randolph County Fire talkgroup 12173 (hex 2f8d).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups; Randolph County Government: 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Stoney Creek, start with the Simulcast site of Randolph County Government, about 8 miles away. Its control channels: 769.75625, 771.23125, 771.48125 MHz.

Data updated .

Randolph County channels that also cover Stoney Creek

Fire Dispatch

Fire Dispatch frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Randolph County FireFire/EMS Dispatch154.1300
In 150.8050
114.8 PLFMNKNNS706

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Randolph County FireFirre/EMS Operations154.2800114.8 PLFMNKNNS706

EMS Dispatch

EMS Dispatch frequencies for Randolph County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Culberson Ambulance ServiceCulberson Ambulance Service155.2350
In 153.6200
114.8 PLFM—

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Randolph County FireCounty Fire Dispatch121732f8dD
Randolph County EMSCounty EMS Dispatch121722f8cD

Randolph County Government

Randolph County Government talkgroups
AgencyDescriptionTalkgroupHexMode
Randolph County FireCounty Fire Dispatch100162720D
Randolph County FireCounty Fireground100182722D
Randolph County FireCounty Fireground100192723D
Randolph County FireCounty Fireground100202724D
Randolph County FireCounty Fireground100212725D
Randolph County FireCounty Fire Water Operations100242728D
Randolph County EMSCounty EMS Dispatch10030272eD
Randolph County EMSCounty EMS Operations10031272fD
Randolph County EMSCounty EMS Operations100322730D
Randolph County EMSCounty EMS Operations100332731D
Randolph County EMSCounty EMS Operations100342732D

Nearest trunked radio sites

Distances are measured from the center of Stoney Creek.

Simulcast · Randolph County Government
RFSS 1 · Site 1 (hex 1) · NAC 42C · about 8 mi away
Control 769.75625, 771.23125, 771.48125, 771.75625, 772.93125
Dalton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 31 (hex 1F) · NAC 6B1 · about 11 mi away
Control 852.9, 853.3875
Voice 851.3875, 851.825, 852.4125
Muncie · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 75 (hex 4B) · NAC 6B5 · about 12 mi away
Control 852.95, 853.2625
Voice 851.0125, 851.05, 851.175, 851.225, 851.3125, 851.6, 851.95, 852.1, 852.6375, 853.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Stoney Creek?

We do not have a fire dispatch channel listed specifically for Stoney Creek. The county-level fire dispatch channels in the same county: Randolph County Fire 154.1300 MHz, narrow FM, 114.8 PL.

What frequency does EMS or the ambulance service use in Stoney Creek?

We do not have a EMS dispatch channel listed specifically for Stoney Creek. The county-level EMS dispatch channels in the same county: Culberson Ambulance Service 155.2350 MHz, FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Stoney Creek?

Yes. The county-level systems that cover Stoney Creek are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups; Randolph County Government: 11 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Stoney Creek?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Stoney Creek?

For Stoney Creek, start with the Simulcast site of Randolph County Government. Its control channels are 769.75625, 771.23125, 771.48125, 771.75625 MHz. Program a control channel first; the scanner finds the voice channels from it.