About Bainbridge Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bainbridge: Dubois County Fire 154.1300 MHz, narrow FM, 123.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Dubois County Fire talkgroup 21160 (hex 52a8).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bainbridge, start with the Jasper site of Indiana Project Hoosier SAFE-T, about 0 miles away. Its control channels: 853.7125, 857.2125 MHz.
Data updated .
Dubois County channels that also cover Bainbridge
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dubois County Fire | Dubois County Fire – Dispatch (Countywide) | 154.1300 In 159.2550 | 123.0 PL | FMN | WQBR498 |
| Dubois County Fire | Dubois County Fire – Dispatch | 155.6400 In 159.4500 | 74.4 PL | FMN | WQBR498 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dubois County Fire | Dubois County Fire – Fire Ground (Countywide) | 154.1600 | FMN | WQBR498 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dubois County EMS | IHERN – Memorial Hospital Base (Jasper Memorial) | 155.3400 | 167.9 PL | FMN | KTZ410 |
| Dubois County EMS | IHERN – Statewide All Call (Jasper Memorial) | 155.3400 | 203.5 PL | FMN | KTZ410 |
| Dubois County EMS | Dubois County EMS – Tactical Channel | 155.6400 In 159.4500 | 186.2 PL | FMN | WQBR498 |
| IHERN - Southwest EMS | IHERN – Southwest EMS (Jasper Memorial) | 155.3400 | 192.8 PL | FMN | KTZ410 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Dubois County Fire | Dubois County Fire – Dispatch | 21160 | 52a8 | D |
| Dubois County Fire | Dubois County Fire – Fire Ground | 21161 | 52a9 | D |
| Dubois County Fire | Dubois County Fire – Fire Ground | 21162 | 52aa | D |
| Dubois County Fire | Dubois County Fire – Fire Ground | 21163 | 52ab | D |
| Dubois County Fire | Dubois County Fire – Fire Ground | 21164 | 52ac | D |
| Dubois County EMS | Dubois County EMS – Dispatch | 21171 | 52b3 | D |
| Dubois County EMS | Dubois County EMS – Operations | 21172 | 52b4 | D |
| Dubois County EMS | Dubois County EMS – Operations | 21173 | 52b5 | D |
Nearest trunked radio sites
Distances are measured from the center of Bainbridge.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bainbridge?
We do not have a fire dispatch channel listed specifically for Bainbridge. The county-level fire dispatch channels in the same county: Dubois County Fire 154.1300 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Bainbridge?
Yes. The county-level systems that cover Bainbridge are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bainbridge?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bainbridge?
For Bainbridge, start with the Jasper site of Indiana Project Hoosier SAFE-T. Its control channels are 853.7125, 857.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.