Skip to content

Otwell Fire and EMS Frequencies

We do not have frequencies listed specifically for Otwell in Pike County, Indiana yet. Countywide channels for Pike County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Jasper (Indiana Project Hoosier SAFE-T), about 10 miles away.

About Otwell Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Otwell: Pike Co Fire/EMS - Dispatch 151.3700 MHz, narrow FM, 82.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Pike County Fire talkgroup 21587 (hex 5453).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Otwell, start with the Jasper site of Indiana Project Hoosier SAFE-T, about 10 miles away. Its control channels: 853.7125, 857.2125 MHz.

Data updated .

Pike County channels that also cover Otwell

Fire Dispatch

Fire Dispatch frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike Co Fire/EMS - DispatchPike Co Fire/EMS – Dispatch151.370082.5 PLFMNWNUK817

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson Twp Fire - OperationsJefferson Twp Fire – Operations154.340085.4 PLFMNKNBY316
Jefferson Twp Fire - OperationsJefferson Twp Fire – Operations (Digital)154.3400NXDN48KNBY316
Lockhart Twp Fire - OperationsLockhart Twp Fire – Operations154.2350118.8 PLFMNWNZZ251
Patoka Twp Fire - OperationsPatoka Twp Fire – Operations154.2500
In 158.9250
179.9 PLFMNWPMA459

EMS Tactical

EMS Tactical frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike Co EMS - OperationsPike Co EMS – Operations154.040082.5 PLFMNKUN492

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Pike County FirePike County Fire – Dispatch215875453D
Pike County FirePike County Fire – Fire Ground215885454D
Pike County FirePike County Fire – Fire Ground215895455D
Pike County FirePike County Fire – Fire Ground215905456D
Pike County EMSPike County EMS – Dispatch215855451D
Pike County EMSPike County EMS – Tactical Channel215865452D

Nearest trunked radio sites

Distances are measured from the center of Otwell.

Jasper · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 23 (hex 17) · NAC 6BD · about 10 mi away
Control 853.7125, 857.2125
Voice 851.125, 852.8875, 853.35, 859.2125
Augusta · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 68 (hex 44) · NAC 6B6 · about 10 mi away
Control 853.9, 859.9875
Voice 851.2625, 852.8625, 853.325
Petersburg · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 22 (hex 16) · NAC 6B2 · about 10 mi away
Control 852.975, 853.475
Voice 851.475, 851.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Otwell?

We do not have a fire dispatch channel listed specifically for Otwell. The county-level fire dispatch channels in the same county: Pike Co Fire/EMS - Dispatch 151.3700 MHz, narrow FM, 82.5 PL.

Do fire departments and EMS use a trunked radio system in Otwell?

Yes. The county-level systems that cover Otwell are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Otwell?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Otwell?

For Otwell, start with the Jasper site of Indiana Project Hoosier SAFE-T. Its control channels are 853.7125, 857.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.