Skip to content

Lafayette Fire and EMS Frequencies

We do not have frequencies listed specifically for Lafayette in Floyd County, Indiana yet. Countywide channels for Floyd County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Floyds Knob (Indiana Project Hoosier SAFE-T), about 2 miles away.

About Lafayette Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lafayette: Floyd County Government 154.1300 MHz, narrow FM, 151.4 PL. County-level ems dispatch that covers Lafayette: AmeriPro EMS 452.3000 MHz, DMR, CC 1 · TG 1 · SL 1. Trunked: Indiana Project Hoosier SAFE-T, for example Floyd County Fire talkgroup 21188 (hex 52c4).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lafayette, start with the Floyds Knob site of Indiana Project Hoosier SAFE-T, about 2 miles away. Its control channels: 853.4, 853.9, 854.1625 MHz.

Data updated .

Floyd County channels that also cover Lafayette

Fire Dispatch

Fire Dispatch frequencies for Floyd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Floyd County GovernmentFloyd County Government – Dispatch (Channel 1)154.1300
In 159.3000
151.4 PLFMNWNHV234

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Floyd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Floyd County GovernmentFloyd County Government – Tactical Channel (Channel 6)154.2350FMNKNBD591

EMS Dispatch

EMS Dispatch frequencies for Floyd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
AmeriPro EMSAmeriPro EMS – Dispatch452.3000
In 457.3000
CC 1 · TG 1 · SL 1DMRKNEJ305

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Floyd County FireFloyd County Fire – Dispatch (County)2118852c4D
Floyd County FireFloyd County Fire – Operations (County)2118952c5D
Floyd County FireFloyd County Fire – Operations (County)2119052c6D
Floyd County FireFloyd County Fire – Operations (County)2119152c7D
Floyd County FireFloyd County Fire – Operations (County)2119252c8D
Floyd County EMSFloyd County EMS – Dispatch (County)2119352c9D
Floyd County EMSAmeriPro EMS2120252d2D

Nearest trunked radio sites

Distances are measured from the center of Lafayette.

Floyds Knob · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 34 (hex 22) · NAC 6B3 · about 2 mi away
Control 853.4, 853.9, 854.1625, 854.4375
Voice 851.4, 852.4, 852.9
Georgetown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 82 (hex 52) · about 7 mi away
Control 772.60625, 772.85625
Voice 769.11875, 772.10625, 772.35625
Pekin · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 52 (hex 34) · NAC 6B5 · about 10 mi away
Control 853.85
Voice 852.7875, 853.2125, 853.8125, 853.975
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lafayette?

We do not have a fire dispatch channel listed specifically for Lafayette. The county-level fire dispatch channels in the same county: Floyd County Government 154.1300 MHz, narrow FM, 151.4 PL.

What frequency does EMS or the ambulance service use in Lafayette?

We do not have a EMS dispatch channel listed specifically for Lafayette. The county-level EMS dispatch channels in the same county: AmeriPro EMS 452.3000 MHz, DMR, CC 1 · TG 1 · SL 1.

Do fire departments and EMS use a trunked radio system in Lafayette?

Yes. The county-level systems that cover Lafayette are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lafayette?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lafayette?

For Lafayette, start with the Floyds Knob site of Indiana Project Hoosier SAFE-T. Its control channels are 853.4, 853.9, 854.1625, 854.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.