Skip to content

Wood Fire and EMS Frequencies

We do not have frequencies listed specifically for Wood in Clark County, Indiana yet. Countywide channels for Clark County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Pekin (Indiana Project Hoosier SAFE-T), about 4 miles away.

About Wood Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Wood: Fire/EMS/EMA 154.4300 MHz, narrow FM, 110.9 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Clark County Fire talkgroup 21066 (hex 524a).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wood, start with the Pekin site of Indiana Project Hoosier SAFE-T, about 4 miles away. Its control channels: 853.85 MHz.

Data updated .

Clark County channels that also cover Wood

Fire Dispatch

Fire Dispatch frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/EMAFire/EMS/EMA – Dispatch154.4300
In 159.3600
110.9 PLFMNWRXF775

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/EMADisaster Response Operations153.8300110.9 PLFMNWRXF775
Fire/EMS/EMAFire/EMS/EMA – Fire Ground154.1450110.9 PLFMNWRXF775
Fire/EMS/EMAFire/EMS/EMA – Fire Ground154.2050110.9 PLFMNWRXF775
Fire/EMS/EMAFire/EMS/EMA – Fire Ground154.2800110.9 PLFMNWRXF775
Fire/EMS/EMAMonroe Township Fire
Patched to SAFE-T TG 10-FIRE-3
155.0850103.5 PLFMNKTO566
Fire/EMS/EMANew Washington Fireground/Operations155.3850
In 151.1075
156.7 PLFMNWQAN793

EMS Tactical

EMS Tactical frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/EMAFire/EMS/EMA – Tactical Channel156.1875
In 154.0925
186.2 PLFMNWPXM793

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Clark County FireCentral Dispatch21066524aD
Clark County FireCentral Dispatch21067524bD
Clark County FireCentral Tactical210575241D
Clark County FireClark County Fire – Fire Ground210625246D
Clark County FireClark County Fire – Fire Ground210785256D
Clark County FireClark County Fire – Fire Ground210795257D
Clark County FireClark County Fire – Fire Ground210805258D
Clark County FireClark County Fire – Fire Ground210815259D
Clark County FireClark County Fire – Fire Ground21082525aD
Clark County EMSClark County EMS – Tactical Channel (County)210745252D

Nearest trunked radio sites

Distances are measured from the center of Wood.

Pekin · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 52 (hex 34) · NAC 6B5 · about 4 mi away
Control 853.85
Voice 852.7875, 853.2125, 853.8125, 853.975
Floyds Knob · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 34 (hex 22) · NAC 6B3 · about 9 mi away
Control 853.4, 853.9, 854.1625, 854.4375
Voice 851.4, 852.4, 852.9
Georgetown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 82 (hex 52) · about 10 mi away
Control 772.60625, 772.85625
Voice 769.11875, 772.10625, 772.35625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Wood?

We do not have a fire dispatch channel listed specifically for Wood. The county-level fire dispatch channels in the same county: Fire/EMS/EMA 154.4300 MHz, narrow FM, 110.9 PL.

Do fire departments and EMS use a trunked radio system in Wood?

Yes. The county-level systems that cover Wood are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wood?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wood?

For Wood, start with the Pekin site of Indiana Project Hoosier SAFE-T. Its control channels are 853.85 MHz. Program a control channel first; the scanner finds the voice channels from it.