Skip to content

Springfield Fire and EMS Frequencies

We do not have frequencies listed specifically for Springfield in Franklin County, Indiana yet. Countywide channels for Franklin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Brookville (Indiana Project Hoosier SAFE-T), about 8 miles away.

About Springfield Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Springfield: Franklin County Fire/EMS 154.3550 MHz, FM, 210.7 PL. County-level ems dispatch that covers Springfield: Franklin County Fire/EMS 155.2050 MHz, FM, 218.1 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Franklin County Fire talkgroup 21226 (hex 52ea).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Springfield, start with the Brookville site of Indiana Project Hoosier SAFE-T, about 8 miles away. Its control channels: 853.8875 MHz.

Data updated .

Franklin County channels that also cover Springfield

Fire Dispatch

Fire Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County Fire/EMSCounty Fire Dispatch154.3550210.7 PLFMKNAU466

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County Fire/EMSNew Trenton Fire Tactical154.0700FMKX5082
Franklin County Fire/EMSEagle Fire Company (Oldenburg)154.1900FMKNAU466
Franklin County Fire/EMSNew Trenton Fire Mutual Aid (Dearborn County)154.2200CSQFMKX5082
Franklin County Fire/EMSCounty Fireground154.4450103.5 PLFMKNAU466

EMS Dispatch

EMS Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County Fire/EMSFranklin County Fire/EMS – Dispatch155.2050218.1 PLFMKIL385

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Franklin County FireFranklin County Fire – Dispatch2122652eaD
Franklin County FireFranklin County Fire – Fire Ground2122752ebD
Franklin County FireFranklin County Fire – Fire Ground2122852ecD
Franklin County FireFranklin County Fire – Fire Ground2122952edD
Franklin County EMSFranklin County EMS – Dispatch2121752e1D
Franklin County EMSFranklin County EMS – Operations2121852e2D
Franklin County EMSFranklin County EMS – Operations2121952e3D
Franklin County EMSFranklin County EMS – Operations2122052e4D

Nearest trunked radio sites

Distances are measured from the center of Springfield.

Brookville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 41 (hex 29) · NAC 6B4 · about 8 mi away
Control 853.8875
Voice 851.475, 851.975, 853.475, 853.7
St. Leon · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 35 (hex 23) · NAC 6B9 · about 9 mi away
Control 852.925, 853.425, 853.925
Voice 851.925, 852.425
Guilford · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 42 (hex 2A) · NAC 6B4 · about 14 mi away
Control 851.325, 852.975, 853.9875, 854.2375
Voice 851.075
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Springfield?

We do not have a fire dispatch channel listed specifically for Springfield. The county-level fire dispatch channels in the same county: Franklin County Fire/EMS 154.3550 MHz, FM, 210.7 PL.

What frequency does EMS or the ambulance service use in Springfield?

We do not have a EMS dispatch channel listed specifically for Springfield. The county-level EMS dispatch channels in the same county: Franklin County Fire/EMS 155.2050 MHz, FM, 218.1 PL.

Do fire departments and EMS use a trunked radio system in Springfield?

Yes. The county-level systems that cover Springfield are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Springfield?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Springfield?

For Springfield, start with the Brookville site of Indiana Project Hoosier SAFE-T. Its control channels are 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.