Skip to content

Wayne Fire and EMS Frequencies

We do not have frequencies listed specifically for Wayne in Fulton County, Indiana yet. Countywide channels for Fulton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rochester (Indiana Project Hoosier SAFE-T), about 10 miles away.

About Wayne Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Wayne: Fulton County Fire/EMS 154.2350 MHz, narrow FM, 103.5 PL. County-level ems dispatch that covers Wayne: Fulton County Fire/EMS 155.2050 MHz, narrow FM, 192.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Fulton County Fire talkgroup 10269 (hex 281d).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wayne, start with the Rochester site of Indiana Project Hoosier SAFE-T, about 10 miles away. Its control channels: 853.4, 855.4875 MHz.

Data updated .

Fulton County channels that also cover Wayne

Fire Dispatch

Fire Dispatch frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fulton County Fire/EMSFulton County Fire/EMS – Dispatch (Countywide)154.2350
In 150.7900
103.5 PLFMNKFT462

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fulton County Fire/EMSAkron Fire154.3400FM—
Fulton County Fire/EMSKewanna Fire155.7600FMKNJB880
Kewana FireLocal Govt / Fire Tactical155.7600FMNKNJB880

EMS Dispatch

EMS Dispatch frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fulton County Fire/EMSParkview Hospital Samaritan155.2050192.8 PLFMNKWS502
Fulton County Fire/EMSLutheran-Fulton Co. EMS Dispatch155.9550
In 151.0400
103.5 PLFMNKDZ745

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Fulton County FireFulton County Fire – Dispatch10269281dD
Fulton County FireFulton County Fire – Fire Ground10270281eD
Fulton County EMSFulton County EMS – Dispatch10268281cD
Fulton County EMSFulton County EMS – Operations10267281bD

Nearest trunked radio sites

Distances are measured from the center of Wayne.

Rochester · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 48 (hex 30) · NAC 6BC · about 10 mi away
Control 853.4, 855.4875
Voice 851.4, 852.4
Winamac · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 62 (hex 3E) · NAC 6B2 · about 13 mi away
Control 858.4875, 858.6625
Voice 853.3625, 856.4875, 858.2625
Logansport · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 57 (hex 39) · NAC 6B7 · about 14 mi away
Control 857.4875, 859.2125
Voice 851.9875, 852.9, 853.4875, 858.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Wayne?

We do not have a fire dispatch channel listed specifically for Wayne. The county-level fire dispatch channels in the same county: Fulton County Fire/EMS 154.2350 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Wayne?

We do not have a EMS dispatch channel listed specifically for Wayne. The county-level EMS dispatch channels in the same county: Fulton County Fire/EMS 155.2050 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Wayne?

Yes. The county-level systems that cover Wayne are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wayne?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wayne?

For Wayne, start with the Rochester site of Indiana Project Hoosier SAFE-T. Its control channels are 853.4, 855.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.