About Star City Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Star City: Pulaski County Fire/EMS 154.4000 MHz, narrow FM, 94.8 PL. County-level ems dispatch that covers Star City: Pulaski County Fire/EMS 152.3975 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example Pulaski County Fire talkgroup 12144 (hex 2f70).
- 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Star City, start with the Winamac site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 858.4875, 858.6625 MHz.
Data updated .
Pulaski County channels that also cover Star City
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Dispatch | 154.4000 | 94.8 PL | FMN | WNAA622 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pulaski County Fire/EMS | Rescue Squad | 155.2050 | FMN | WNMR878 | |
| Pulaski County Fire/EMS | EMA – Operations | 155.9850 | FMN | KNFF776 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pulaski County Fire/EMS | United EMS – Winamac Dispatch | 152.3975 | FMN | — | |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Winamac | 453.2250 | 423 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Winamac | 453.4000 | 464 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Winamac | 453.7500 | 411 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Winamac | 453.9250 | 412 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Star City | 458.2250 | 431 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Francisville | 458.4000 | 465 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Monteray | 458.7500 | 411 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Medaryville | 458.9250 | 413 DPL | FMN | WPMH292 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pulaski County Fire/EMS | United EMS | 158.7000 | FMN | — |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pulaski County Fire | County Fire Dispatch | 12144 | 2f70 | D |
| Pulaski County EMS | County EMS Dispatch | 12143 | 2f6f | D |
Nearest trunked radio sites
Distances are measured from the center of Star City.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Star City?
We do not have a fire dispatch channel listed specifically for Star City. The county-level fire dispatch channels in the same county: Pulaski County Fire/EMS 154.4000 MHz, narrow FM, 94.8 PL.
What frequency does EMS or the ambulance service use in Star City?
We do not have a EMS dispatch channel listed specifically for Star City. The county-level EMS dispatch channels in the same county: Pulaski County Fire/EMS 152.3975 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Star City?
Yes. The county-level systems that cover Star City are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Star City?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Star City?
For Star City, start with the Winamac site of Indiana Project Hoosier SAFE-T. Its control channels are 858.4875, 858.6625 MHz. Program a control channel first; the scanner finds the voice channels from it.