Skip to content

Indian Creek Fire and EMS Frequencies

We do not have frequencies listed specifically for Indian Creek in Pulaski County, Indiana yet. Countywide channels for Pulaski County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Winamac (Indiana Project Hoosier SAFE-T), about 7 miles away.

About Indian Creek Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Indian Creek: Pulaski County Fire/EMS 154.4000 MHz, narrow FM, 94.8 PL. County-level ems dispatch that covers Indian Creek: Pulaski County Fire/EMS 152.3975 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example Pulaski County Fire talkgroup 12144 (hex 2f70).

  • 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Indian Creek, start with the Winamac site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 858.4875, 858.6625 MHz.

Data updated .

Pulaski County channels that also cover Indian Creek

Fire Dispatch

Fire Dispatch frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski County Fire/EMSPulaski County Fire/EMS – Dispatch154.400094.8 PLFMNWNAA622

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski County Fire/EMSRescue Squad155.2050FMNWNMR878
Pulaski County Fire/EMSEMA – Operations155.9850FMNKNFF776

EMS Dispatch

EMS Dispatch frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski County Fire/EMSUnited EMS – Winamac Dispatch152.3975FMN—
Pulaski County Fire/EMSPulaski County Fire/EMS – Remote Link – Winamac453.2250423 DPLFMNWPMH292
Pulaski County Fire/EMSPulaski County Fire/EMS – Remote Link – Winamac453.4000464 DPLFMNWPMH292
Pulaski County Fire/EMSPulaski County Fire/EMS – Remote Link – Winamac453.7500411 DPLFMNWPMH292
Pulaski County Fire/EMSPulaski County Fire/EMS – Remote Link – Winamac453.9250412 DPLFMNWPMH292
Pulaski County Fire/EMSPulaski County Fire/EMS – Remote Link – Star City458.2250431 DPLFMNWPMH292
Pulaski County Fire/EMSPulaski County Fire/EMS – Remote Link – Francisville458.4000465 DPLFMNWPMH292
Pulaski County Fire/EMSPulaski County Fire/EMS – Remote Link – Monteray458.7500411 DPLFMNWPMH292
Pulaski County Fire/EMSPulaski County Fire/EMS – Remote Link – Medaryville458.9250413 DPLFMNWPMH292

EMS Tactical

EMS Tactical frequencies for Pulaski County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pulaski County Fire/EMSUnited EMS158.7000FMN—

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Pulaski County FireCounty Fire Dispatch121442f70D
Pulaski County EMSCounty EMS Dispatch121432f6fD

Nearest trunked radio sites

Distances are measured from the center of Indian Creek.

Winamac · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 62 (hex 3E) · NAC 6B2 · about 7 mi away
Control 858.4875, 858.6625
Voice 853.3625, 856.4875, 858.2625
Lake Shafer · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 93 (hex 5D) · NAC 6B3 · about 13 mi away
Control 773.48125, 774.13125
Voice 770.10625, 771.10625, 772.25625, 772.95625
Monticello · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 65 (hex 41) · NAC 6B5 · about 16 mi away
Control 857.9375, 857.9875
Voice 856.2125, 856.9875, 857.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Indian Creek?

We do not have a fire dispatch channel listed specifically for Indian Creek. The county-level fire dispatch channels in the same county: Pulaski County Fire/EMS 154.4000 MHz, narrow FM, 94.8 PL.

What frequency does EMS or the ambulance service use in Indian Creek?

We do not have a EMS dispatch channel listed specifically for Indian Creek. The county-level EMS dispatch channels in the same county: Pulaski County Fire/EMS 152.3975 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Indian Creek?

Yes. The county-level systems that cover Indian Creek are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Indian Creek?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Indian Creek?

For Indian Creek, start with the Winamac site of Indiana Project Hoosier SAFE-T. Its control channels are 858.4875, 858.6625 MHz. Program a control channel first; the scanner finds the voice channels from it.