Skip to content

Liberty Fire and EMS Frequencies

We do not have frequencies listed specifically for Liberty in White County, Indiana yet. Countywide channels for White County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lake Shafer (Indiana Project Hoosier SAFE-T), about 4 miles away.

About Liberty Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Liberty: Fire/EMS/Emergency Management 151.3775 MHz, narrow FM, no tone. County-level ems dispatch that covers Liberty: Fire/EMS/Emergency Management 462.9500 MHz, narrow FM, 127.3 PL. Trunked: Indiana Project Hoosier SAFE-T, for example White County Fire talkgroup 12465 (hex 30b1).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Liberty, start with the Lake Shafer site of Indiana Project Hoosier SAFE-T, about 4 miles away. Its control channels: 773.48125, 774.13125 MHz.

Data updated .

White County channels that also cover Liberty

Fire Dispatch

Fire Dispatch frequencies for White County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/Emergency ManagementWolcott Fire – Dispatch151.3775
In 159.2775
FMNKCY794
Fire/EMS/Emergency ManagementFire/EMS/Emergency Management – Dispatch (Countywide)154.2500162 DPLFMNWPDG642

Fire Ground / Tactical

Fire Ground / Tactical frequencies for White County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/Emergency ManagementEmergency Management (EMA Backup)154.1150FMNKSU662
Fire/EMS/Emergency ManagementFire/EMS/Emergency Management – Operations (Countywide)154.1600162 DPLFMNWPDG642
Fire/EMS/Emergency ManagementFire/EMS/Emergency Management – Operations (Countywide)154.2050FMNWPDG642
Fire/EMS/Emergency ManagementFire/EMS/Emergency Management – Operations (Countywide)154.4450FMNWPDG642

EMS Dispatch

EMS Dispatch frequencies for White County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/Emergency ManagementWolcott EMS – Dispatch462.9500
In 467.9500
127.3 PLFMNWSIN289

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
White County FireWhite County Fire – Dispatch (Countywide)1246530b1D
White County EMSWhite County EMS – Operations (County)1246130adD

Nearest trunked radio sites

Distances are measured from the center of Liberty.

Lake Shafer · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 93 (hex 5D) · NAC 6B3 · about 4 mi away
Control 773.48125, 774.13125
Voice 770.10625, 771.10625, 772.25625, 772.95625
Monticello · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 65 (hex 41) · NAC 6B5 · about 8 mi away
Control 857.9375, 857.9875
Voice 856.2125, 856.9875, 857.4375
Monon · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 18 (hex 12) · NAC 6BF · about 15 mi away
Control 858.9625, 859.9625
Voice 851.475, 853.8625, 855.9625, 856.9625, 857.9625, 858.5125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Liberty?

We do not have a fire dispatch channel listed specifically for Liberty. The county-level fire dispatch channels in the same county: Fire/EMS/Emergency Management 151.3775 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Liberty?

We do not have a EMS dispatch channel listed specifically for Liberty. The county-level EMS dispatch channels in the same county: Fire/EMS/Emergency Management 462.9500 MHz, narrow FM, 127.3 PL.

Do fire departments and EMS use a trunked radio system in Liberty?

Yes. The county-level systems that cover Liberty are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Liberty?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Liberty?

For Liberty, start with the Lake Shafer site of Indiana Project Hoosier SAFE-T. Its control channels are 773.48125, 774.13125 MHz. Program a control channel first; the scanner finds the voice channels from it.