About Buffalo Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Buffalo: Fire/EMS/Emergency Management 151.3775 MHz, narrow FM, no tone. County-level ems dispatch that covers Buffalo: Fire/EMS/Emergency Management 462.9500 MHz, narrow FM, 127.3 PL. Trunked: Indiana Project Hoosier SAFE-T, for example White County Fire talkgroup 12465 (hex 30b1).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Buffalo, start with the Lake Shafer site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 773.48125, 774.13125 MHz.
Data updated .
White County channels that also cover Buffalo
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Wolcott Fire – Dispatch | 151.3775 In 159.2775 | FMN | KCY794 | |
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Dispatch (Countywide) | 154.2500 | 162 DPL | FMN | WPDG642 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Emergency Management (EMA Backup) | 154.1150 | FMN | KSU662 | |
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Operations (Countywide) | 154.1600 | 162 DPL | FMN | WPDG642 |
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Operations (Countywide) | 154.2050 | FMN | WPDG642 | |
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Operations (Countywide) | 154.4450 | FMN | WPDG642 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Wolcott EMS – Dispatch | 462.9500 In 467.9500 | 127.3 PL | FMN | WSIN289 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| White County Fire | White County Fire – Dispatch (Countywide) | 12465 | 30b1 | D |
| White County EMS | White County EMS – Operations (County) | 12461 | 30ad | D |
Nearest trunked radio sites
Distances are measured from the center of Buffalo.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Buffalo?
We do not have a fire dispatch channel listed specifically for Buffalo. The county-level fire dispatch channels in the same county: Fire/EMS/Emergency Management 151.3775 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Buffalo?
We do not have a EMS dispatch channel listed specifically for Buffalo. The county-level EMS dispatch channels in the same county: Fire/EMS/Emergency Management 462.9500 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Buffalo?
Yes. The county-level systems that cover Buffalo are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Buffalo?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Buffalo?
For Buffalo, start with the Lake Shafer site of Indiana Project Hoosier SAFE-T. Its control channels are 773.48125, 774.13125 MHz. Program a control channel first; the scanner finds the voice channels from it.