About Posey Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Posey: Harrison County Fire 158.8650 MHz, narrow FM, 167.9 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Harrison County Fire talkgroup 21276 (hex 531c).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 10 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Posey, start with the Doolittle Hill site of Indiana Project Hoosier SAFE-T, about 4 miles away. Its control channels: 771.70625 MHz.
- 10 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Harrison County channels that also cover Posey
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Harrison County Fire | Fire/EMA/EMS – Dispatch | 158.7450 In 153.7550 | RAN 61 | NXDN48 Encrypted | WQA831 |
| Harrison County Fire | Fire/EMA/EMS – Remote Receive (to Dispatch) | 158.8650 | 167.9 PL | FMN | WQA831 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Boone Township Fireground Fire | Boone Township Fireground (R) | 154.3325 | RAN 02 | NXDN48 Encrypted | WRTQ957 |
| Elizabeth Fireground Fire | Elizabeth Fireground (R) | 154.7550 | RAN 04 | NXDN48 Encrypted | WRTQ957 |
| Harrison Township Fireground Fire | Harrison Township Fireground (R) | 155.5950 | RAN 06 | NXDN48 Encrypted | WRTQ957 |
| Heth Township Fireground Fire | Heth Township Fireground (R) | 155.6625 | RAN 08 | NXDN48 Encrypted | WRTQ957 |
| Lanesville Fireground Fire | Lanesville Fireground (R) | 155.7900 | RAN 10 | NXDN48 Encrypted | WRTQ957 |
| Milltown Fireground Fire | Milltown Fireground | 154.0025 | RAN 12 | NXDN48 Encrypted | WRTQ957 |
| New Middletown Fireground Fire | New Middletown Fireground | 154.0925 | RAN 14 | NXDN48 Encrypted | WRTQ957 |
| Palmyra Fireground Fire | Palmyra Fireground | 155.1000 | RAN 16 | NXDN48 Encrypted | WRTQ957 |
| Ramsey Fireground Fire | Ramsey Fireground | 155.8875 | RAN 18 | NXDN48 Encrypted | WRTQ957 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Harrison County Fire | County Fire Dispatch | 21276 | 531c | D |
| Harrison County EMS | County EMS Operations | 21275 | 531b | D |
Nearest trunked radio sites
Distances are measured from the center of Posey.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Posey?
We do not have a fire dispatch channel listed specifically for Posey. The county-level fire dispatch channels in the same county: Harrison County Fire 158.8650 MHz, narrow FM, 167.9 PL.
Do fire departments and EMS use a trunked radio system in Posey?
Yes. The county-level systems that cover Posey are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Posey?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Posey?
For Posey, start with the Doolittle Hill site of Indiana Project Hoosier SAFE-T. Its control channels are 771.70625 MHz. Program a control channel first; the scanner finds the voice channels from it.