Skip to content

Taylor Fire and EMS Frequencies

We do not have frequencies listed specifically for Taylor in Harrison County, Indiana yet. Countywide channels for Harrison County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rabbit Hash Ridge (Indiana Project Hoosier SAFE-T), about 1 miles away.

About Taylor Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Taylor: Harrison County Fire 158.8650 MHz, narrow FM, 167.9 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Harrison County Fire talkgroup 21276 (hex 531c).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 10 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Taylor, start with the Rabbit Hash Ridge site of Indiana Project Hoosier SAFE-T, about 1 miles away. Its control channels: 853.475 MHz.
  • 10 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Harrison County channels that also cover Taylor

Fire Dispatch

Fire Dispatch frequencies for Harrison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harrison County FireFire/EMA/EMS – Dispatch158.7450
In 153.7550
RAN 61NXDN48 EncryptedWQA831
Harrison County FireFire/EMA/EMS – Remote Receive (to Dispatch)158.8650167.9 PLFMNWQA831

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Harrison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Boone Township Fireground FireBoone Township Fireground (R)154.3325RAN 02NXDN48 EncryptedWRTQ957
Elizabeth Fireground FireElizabeth Fireground (R)154.7550RAN 04NXDN48 EncryptedWRTQ957
Harrison Township Fireground FireHarrison Township Fireground (R)155.5950RAN 06NXDN48 EncryptedWRTQ957
Heth Township Fireground FireHeth Township Fireground (R)155.6625RAN 08NXDN48 EncryptedWRTQ957
Lanesville Fireground FireLanesville Fireground (R)155.7900RAN 10NXDN48 EncryptedWRTQ957
Milltown Fireground FireMilltown Fireground154.0025RAN 12NXDN48 EncryptedWRTQ957
New Middletown Fireground FireNew Middletown Fireground154.0925RAN 14NXDN48 EncryptedWRTQ957
Palmyra Fireground FirePalmyra Fireground155.1000RAN 16NXDN48 EncryptedWRTQ957
Ramsey Fireground FireRamsey Fireground155.8875RAN 18NXDN48 EncryptedWRTQ957

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Harrison County FireCounty Fire Dispatch21276531cD
Harrison County EMSCounty EMS Operations21275531bD

Nearest trunked radio sites

Distances are measured from the center of Taylor.

Rabbit Hash Ridge · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 39 (hex 27) · NAC 6B3 · about 1 mi away
Control 853.475
Voice 851.475, 852.4375, 852.9375, 855.2375
Doolittle Hill · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 83 (hex 53) · NAC 6B2 · about 10 mi away
Control 771.70625
Voice 770.03125, 770.55625, 771.15625, 771.45625
Georgetown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 82 (hex 52) · about 18 mi away
Control 772.60625, 772.85625
Voice 769.11875, 772.10625, 772.35625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Taylor?

We do not have a fire dispatch channel listed specifically for Taylor. The county-level fire dispatch channels in the same county: Harrison County Fire 158.8650 MHz, narrow FM, 167.9 PL.

Do fire departments and EMS use a trunked radio system in Taylor?

Yes. The county-level systems that cover Taylor are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Taylor?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Taylor?

For Taylor, start with the Rabbit Hash Ridge site of Indiana Project Hoosier SAFE-T. Its control channels are 853.475 MHz. Program a control channel first; the scanner finds the voice channels from it.