About Polk Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Polk: Huntington County Fire 154.4300 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Polk: Parkview Huntington Hospital 155.4000 MHz, narrow FM, 141.3 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Huntington County Fire talkgroup 10424 (hex 28b8).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Polk, start with the Wabash site of Indiana Project Hoosier SAFE-T, about 10 miles away. Its control channels: 852.975, 856.7375 MHz.
Data updated .
Huntington County channels that also cover Polk
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Huntington County Fire | Huntington County Fire – Dispatch | 154.4300 | 141.3 PL | FMN | WQM647 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Huntington County Fire | Huntington County Fire – Operations (Channel 2) | 155.0850 | 162.2 PL | FMN | KD26743 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Parkview Huntington Hospital | Parkview Huntington Hospital – Dispatch (155.355R/150.775 | 155.4000 | 141.3 PL | FMN | WRYH333 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Huntington County EMS | Huntington County EMS – Tactical Channel | 153.9200 | 141.3 PL | FMN | KD26743 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Huntington County Fire | County Fire – Dispatch | 10424 | 28b8 | D |
| Huntington County EMS | Parkview Hospital EMS – Dispatch | 10433 | 28c1 | D |
Nearest trunked radio sites
Distances are measured from the center of Polk.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Polk?
We do not have a fire dispatch channel listed specifically for Polk. The county-level fire dispatch channels in the same county: Huntington County Fire 154.4300 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Polk?
We do not have a EMS dispatch channel listed specifically for Polk. The county-level EMS dispatch channels in the same county: Parkview Huntington Hospital 155.4000 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Polk?
Yes. The county-level systems that cover Polk are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Polk?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Polk?
For Polk, start with the Wabash site of Indiana Project Hoosier SAFE-T. Its control channels are 852.975, 856.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.