Skip to content

Liberty Fire and EMS Frequencies

We do not have frequencies listed specifically for Liberty in Wabash County, Indiana yet. Countywide channels for Wabash County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Somerset (Indiana Project Hoosier SAFE-T), about 7 miles away.

About Liberty Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Liberty: Wabash County Fire 154.3100 MHz, narrow FM, 151.4 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Wabash County channels that also cover Liberty

Fire Dispatch

Fire Dispatch frequencies for Wabash County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wabash County FireWabash County Fire – Dispatch – South154.3100
In 150.8050
151.4 PLFMNKNDT246
Wabash County FireWabash County Fire – Dispatch – Central154.3100
In 151.1600
151.4 PLFMNKNDT246
Wabash County FireWabash County Fire – Dispatch – North154.3100
In 159.2850
151.4 PLFMNKNDT246

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wabash County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chester Township (N Manchester)Chester Township (N Manchester) – Operations (Channel 2)154.4450FMNKBZ944
Wabash County FireWabash County Fire – Tactical Channel153.9050114.8 PLFMNKNDT246
Wabash County FireWabash County Fire – Tactical Channel154.0700114.8 PLFMNWPLU983
Wabash County FireWabash County Fire – Tactical Channel154.4450FMNKBZ944

Nearest trunked radio sites

Distances are measured from the center of Liberty.

Somerset · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 58 (hex 3A) · NAC 6B8 · about 7 mi away
Control 853.5375, 853.8625
Voice 851.7, 852.7875, 853.2375
Marion · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 54 (hex 36) · NAC 6BF · about 7 mi away
Control 852.8625, 859.7375
Voice 851.1375, 851.4875, 851.8, 851.9625, 852.3875
Wabash · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 49 (hex 31) · NAC 6B9 · about 9 mi away
Control 852.975, 856.7375
Voice 851.4375, 851.9375, 852.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Liberty?

We do not have a fire dispatch channel listed specifically for Liberty. The county-level fire dispatch channels in the same county: Wabash County Fire 154.3100 MHz, narrow FM, 151.4 PL.

What scanner do I need to listen to fire and EMS in Liberty?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Liberty?

For Liberty, start with the Somerset site of Indiana Project Hoosier SAFE-T. Its control channels are 853.5375, 853.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.