Skip to content

Salamonie Fire and EMS Frequencies

We do not have frequencies listed specifically for Salamonie in Huntington County, Indiana yet. Countywide channels for Huntington County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Warren (Indiana Project Hoosier SAFE-T), about 3 miles away.

About Salamonie Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Salamonie: Huntington County Fire 154.4300 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Salamonie: Parkview Huntington Hospital 155.4000 MHz, narrow FM, 141.3 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Huntington County Fire talkgroup 10424 (hex 28b8).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Salamonie, start with the Warren site of Indiana Project Hoosier SAFE-T, about 3 miles away. Its control channels: 856.9875, 857.9875 MHz.

Data updated .

Huntington County channels that also cover Salamonie

Fire Dispatch

Fire Dispatch frequencies for Huntington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Huntington County FireHuntington County Fire – Dispatch154.4300141.3 PLFMNWQM647

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Huntington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Huntington County FireHuntington County Fire – Operations (Channel 2)155.0850162.2 PLFMNKD26743

EMS Dispatch

EMS Dispatch frequencies for Huntington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Parkview Huntington HospitalParkview Huntington Hospital – Dispatch (155.355R/150.775155.4000141.3 PLFMNWRYH333

EMS Tactical

EMS Tactical frequencies for Huntington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Huntington County EMSHuntington County EMS – Tactical Channel153.9200141.3 PLFMNKD26743

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Huntington County FireCounty Fire – Dispatch1042428b8D
Huntington County EMSParkview Hospital EMS – Dispatch1043328c1D

Nearest trunked radio sites

Distances are measured from the center of Salamonie.

Warren · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 22 (hex 16) · NAC 6B2 · about 3 mi away
Control 856.9875, 857.9875
Voice 852.8125, 853.0875, 853.5125
Bluffton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 51 (hex 33) · NAC 6BA · about 11 mi away
Control 858.9625, 859.9625
Voice 851.25, 851.775, 852.8875, 853.9125, 857.9625
Marion · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 54 (hex 36) · NAC 6BF · about 14 mi away
Control 852.8625, 859.7375
Voice 851.1375, 851.4875, 851.8, 851.9625, 852.3875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Salamonie?

We do not have a fire dispatch channel listed specifically for Salamonie. The county-level fire dispatch channels in the same county: Huntington County Fire 154.4300 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Salamonie?

We do not have a EMS dispatch channel listed specifically for Salamonie. The county-level EMS dispatch channels in the same county: Parkview Huntington Hospital 155.4000 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Salamonie?

Yes. The county-level systems that cover Salamonie are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Salamonie?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Salamonie?

For Salamonie, start with the Warren site of Indiana Project Hoosier SAFE-T. Its control channels are 856.9875, 857.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.