Skip to content

Chester Fire and EMS Frequencies

We do not have frequencies listed specifically for Chester in Wells County, Indiana yet. Countywide channels for Wells County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bluffton (Indiana Project Hoosier SAFE-T), about 9 miles away.

About Chester Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Chester: Wells County Fire 154.1750 MHz, narrow FM, 82.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Wells County Fire talkgroup 12451 (hex 30a3).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Chester, start with the Bluffton site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 858.9625, 859.9625 MHz.

Data updated .

Wells County channels that also cover Chester

Fire Dispatch

Fire Dispatch frequencies for Wells County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wells County FireWells County Fire – Dispatch154.175082.5 PLFMNWNHI522

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wells County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wells County FireWells County Fire – Fire Ground153.980082.5 PLFMNKNDN884
Wells County FireWells County Fire – Fire Ground154.2800CSQFMNKNDN884

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Wells County FireWells County Fire – Dispatch (County)1245130a3D
Wells County FireWells County Fire – Operations (County)1245230a4D
Wells County FireWells County Fire – Operations (County)1245330a5D
Wells County EMSWells County EMS – Dispatch (County)1245030a2D

Nearest trunked radio sites

Distances are measured from the center of Chester.

Bluffton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 51 (hex 33) · NAC 6BA · about 9 mi away
Control 858.9625, 859.9625
Voice 851.25, 851.775, 852.8875, 853.9125, 857.9625
Warren · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 22 (hex 16) · NAC 6B2 · about 11 mi away
Control 856.9875, 857.9875
Voice 852.8125, 853.0875, 853.5125
Security Center · Blackford County Government (IN)
Site 1 (hex 1) · about 12 mi away
Voice 151.325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Chester?

We do not have a fire dispatch channel listed specifically for Chester. The county-level fire dispatch channels in the same county: Wells County Fire 154.1750 MHz, narrow FM, 82.5 PL.

Do fire departments and EMS use a trunked radio system in Chester?

Yes. The county-level systems that cover Chester are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Chester?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Chester?

For Chester, start with the Bluffton site of Indiana Project Hoosier SAFE-T. Its control channels are 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.