About Redding Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Redding: Jackson County Fire 154.2050 MHz, narrow FM, 179.9 PL. County-level ems dispatch that covers Redding: Jackson County EMS 154.8150 MHz, narrow FM, 311 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Jackson County Fire talkgroup 21381 (hex 5385).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Redding, start with the Seymour site of Indiana Project Hoosier SAFE-T, about 4 miles away. Its control channels: 853.9125 MHz.
Data updated .
Jackson County channels that also cover Redding
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County Fire | Jackson County Fire – Dispatch – Countywide (Simulcast on SAFE-T) | 154.2050 In 150.8050 | 179.9 PL | FMN | WQIZ714 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County EMS | Jackson County EMS – Dispatch | 154.8150 In 155.5950 | 311 DPL | FMN | WNXX861 |
| Jackson County EMS | Jackson County EMS – Dispatch | 155.1600 In 153.9200 | 110.9 PL | FMN | WNWS690 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Jackson County Fire | County Fire Dispatch | 21381 | 5385 | D |
| Jackson County Fire | County Fire Operations | 21382 | 5386 | D |
| Jackson County Fire | County Fire Operations | 21383 | 5387 | D |
| Jackson County Fire | County Fire Operations | 21388 | 538c | D |
| Jackson County Fire | County Fire Operations | 21389 | 538d | D |
| Jackson County Fire | County Fire Operations | 21390 | 538e | D |
| Jackson County EMS | County EMS Dispatch | 21378 | 5382 | D |
| Jackson County EMS | County EMS Operations | 21380 | 5384 | D |
Nearest trunked radio sites
Distances are measured from the center of Redding.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Redding?
We do not have a fire dispatch channel listed specifically for Redding. The county-level fire dispatch channels in the same county: Jackson County Fire 154.2050 MHz, narrow FM, 179.9 PL.
What frequency does EMS or the ambulance service use in Redding?
We do not have a EMS dispatch channel listed specifically for Redding. The county-level EMS dispatch channels in the same county: Jackson County EMS 154.8150 MHz, narrow FM, 311 DPL.
Do fire departments and EMS use a trunked radio system in Redding?
Yes. The county-level systems that cover Redding are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Redding?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Redding?
For Redding, start with the Seymour site of Indiana Project Hoosier SAFE-T. Its control channels are 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.