Skip to content

Hayden Fire and EMS Frequencies

We do not have frequencies listed specifically for Hayden in Jennings County, Indiana yet. Countywide channels for Jennings County that may also cover this area are shown below when we have them. The closest trunked radio site we have is North Vernon (Indiana Project Hoosier SAFE-T), about 6 miles away.

About Hayden Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hayden: Jennings County Fire 151.1900 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Hayden: Jennings County EMS 155.2050 MHz, narrow FM, 203.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Jennings County Fire talkgroup 21421 (hex 53ad).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hayden, start with the North Vernon site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 852.4375, 853.3375 MHz.

Data updated .

Jennings County channels that also cover Hayden

Fire Dispatch

Fire Dispatch frequencies for Jennings County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jennings County FireJennings County Fire – Dispatch (East Repeater)151.1900
In 154.2650
100.0 PLFMNWQFN633
Jennings County FireJennings County Fire – Dispatch (West Repeater)151.1900
In 154.4450
100.0 PLFMNWQFN633

Fire Talk-around

Fire Talk-around frequencies for Jennings County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jennings County FireFire Talk-Around (Countywide)151.1900100.0 PLFMNWQFN633

EMS Dispatch

EMS Dispatch frequencies for Jennings County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jennings County EMSJennings County EMS – Dispatch (Countywide)155.2050
In 151.2350
203.5 PLFMNKVT813

EMS Talk-around

EMS Talk-around frequencies for Jennings County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jennings County EMSEMS Talk-Around (Countywide)151.2350203.5 PLFMNKVT813

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Jennings County FireCounty Fire – Dispatch2142153adD
Jennings County FireCounty Fireground2142253aeD
Jennings County FireCounty Fireground2142353afD
Jennings County EMSCounty EMS – Dispatch2141953abD
Jennings County EMSCounty EMS – Operations2142053acD

Nearest trunked radio sites

Distances are measured from the center of Hayden.

North Vernon · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 47 (hex 2F) · NAC 6B4 · about 6 mi away
Control 852.4375, 853.3375
Voice 851.3875, 851.6, 851.9
Seymour · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 32 (hex 20) · NAC 6B9 · about 8 mi away
Control 853.9125
Voice 851.4625, 852.4125, 852.8875, 853.3625, 856.7125
Brownstown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 49 (hex 31) · NAC 6B4 · about 18 mi away
Control 854.3875
Voice 851.225, 852.9375, 853.0375, 853.2875, 854.1125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hayden?

We do not have a fire dispatch channel listed specifically for Hayden. The county-level fire dispatch channels in the same county: Jennings County Fire 151.1900 MHz, narrow FM, 100.0 PL.

What frequency does EMS or the ambulance service use in Hayden?

We do not have a EMS dispatch channel listed specifically for Hayden. The county-level EMS dispatch channels in the same county: Jennings County EMS 155.2050 MHz, narrow FM, 203.5 PL.

Do fire departments and EMS use a trunked radio system in Hayden?

Yes. The county-level systems that cover Hayden are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hayden?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hayden?

For Hayden, start with the North Vernon site of Indiana Project Hoosier SAFE-T. Its control channels are 852.4375, 853.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.