About Smyrna Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Smyrna: Jefferson County Fire 159.2850 MHz, narrow FM, 91.5 PL. County-level ems dispatch that covers Smyrna: Jefferson County EMS 160.1100 MHz, narrow FM, 210.7 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Jefferson County Fire talkgroup 21406 (hex 539e).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Smyrna, start with the Madison site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 857.9625, 858.5125, 858.9625 MHz.
Data updated .
Jefferson County channels that also cover Smyrna
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County Fire | Jefferson County Fire – Dispatch | 159.2850 In 154.0100 | 91.5 PL | FMN | WPQI713 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County EMS | Jefferson County EMS – Dispatch | 160.1100 | 210.7 PL | FMN | WNDE698 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Jefferson County Fire | Jefferson County Fire – Dispatch (County) | 21406 | 539e | D |
| Jefferson County Fire | Jefferson County Fire – Fire Ground (County) | 21407 | 539f | D |
| Jefferson County Fire | Jefferson County Fire – Fire Ground (County) | 21408 | 53a0 | D |
| Jefferson County Fire | Jefferson County Fire – Fire Ground (County) | 21409 | 53a1 | D |
| Jefferson County Fire | Jefferson County Fire – Administration (County) | 21405 | 539d | D |
| Jefferson County EMS | Jefferson County EMS – Dispatch (County) | 21399 | 5397 | D |
| Jefferson County EMS | Jefferson County EMS – Operations (County) | 21400 | 5398 | D |
| Jefferson County EMS | Jefferson County EMS – Administration (County) | 21398 | 5396 | D |
Nearest trunked radio sites
Distances are measured from the center of Smyrna.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Smyrna?
We do not have a fire dispatch channel listed specifically for Smyrna. The county-level fire dispatch channels in the same county: Jefferson County Fire 159.2850 MHz, narrow FM, 91.5 PL.
What frequency does EMS or the ambulance service use in Smyrna?
We do not have a EMS dispatch channel listed specifically for Smyrna. The county-level EMS dispatch channels in the same county: Jefferson County EMS 160.1100 MHz, narrow FM, 210.7 PL.
Do fire departments and EMS use a trunked radio system in Smyrna?
Yes. The county-level systems that cover Smyrna are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Smyrna?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Smyrna?
For Smyrna, start with the Madison site of Indiana Project Hoosier SAFE-T. Its control channels are 857.9625, 858.5125, 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.