Skip to content

Graham Fire and EMS Frequencies

We do not have frequencies listed specifically for Graham in Jefferson County, Indiana yet. Countywide channels for Jefferson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Madison (Indiana Project Hoosier SAFE-T), about 12 miles away.

About Graham Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Graham: Jefferson County Fire 159.2850 MHz, narrow FM, 91.5 PL. County-level ems dispatch that covers Graham: Jefferson County EMS 160.1100 MHz, narrow FM, 210.7 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Jefferson County Fire talkgroup 21406 (hex 539e).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Graham, start with the Madison site of Indiana Project Hoosier SAFE-T, about 12 miles away. Its control channels: 857.9625, 858.5125, 858.9625 MHz.

Data updated .

Jefferson County channels that also cover Graham

Fire Dispatch

Fire Dispatch frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County FireJefferson County Fire – Dispatch159.2850
In 154.0100
91.5 PLFMNWPQI713

EMS Dispatch

EMS Dispatch frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County EMSJefferson County EMS – Dispatch160.1100210.7 PLFMNWNDE698

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Jefferson County FireJefferson County Fire – Dispatch (County)21406539eD
Jefferson County FireJefferson County Fire – Fire Ground (County)21407539fD
Jefferson County FireJefferson County Fire – Fire Ground (County)2140853a0D
Jefferson County FireJefferson County Fire – Fire Ground (County)2140953a1D
Jefferson County FireJefferson County Fire – Administration (County)21405539dD
Jefferson County EMSJefferson County EMS – Dispatch (County)213995397D
Jefferson County EMSJefferson County EMS – Operations (County)214005398D
Jefferson County EMSJefferson County EMS – Administration (County)213985396D

Nearest trunked radio sites

Distances are measured from the center of Graham.

Madison · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 31 (hex 1F) · NAC 6B3 · about 12 mi away
Control 857.9625, 858.5125, 858.9625, 859.9625
Voice 853.8625, 856.9625
North Vernon · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 47 (hex 2F) · NAC 6B4 · about 16 mi away
Control 852.4375, 853.3375
Voice 851.3875, 851.6, 851.9
Jefferson · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 45 (hex 2D) · NAC 6B4 · about 17 mi away
Control 853.5125, 853.7625, 853.9375
Voice 851.175
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Graham?

We do not have a fire dispatch channel listed specifically for Graham. The county-level fire dispatch channels in the same county: Jefferson County Fire 159.2850 MHz, narrow FM, 91.5 PL.

What frequency does EMS or the ambulance service use in Graham?

We do not have a EMS dispatch channel listed specifically for Graham. The county-level EMS dispatch channels in the same county: Jefferson County EMS 160.1100 MHz, narrow FM, 210.7 PL.

Do fire departments and EMS use a trunked radio system in Graham?

Yes. The county-level systems that cover Graham are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Graham?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Graham?

For Graham, start with the Madison site of Indiana Project Hoosier SAFE-T. Its control channels are 857.9625, 858.5125, 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.