About Baker Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Baker: Morgan County Fire 154.3700 MHz, narrow FM, 114.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Morgan County Fire talkgroup 12037 (hex 2f05).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48, DMR), which needs a scanner that decodes those modes.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Baker, start with the Hindustan site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 853.5875, 854.4625 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Morgan County channels that also cover Baker
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morgan County Fire | Morgan County Fire – Dispatch (Simulcast on SAFE – T) | 154.3700 In 151.4150 | 114.8 PL | FMN | WPHZ781 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morgan County Fire | County Emergency Management/911 Dispatch | 151.0775 In 156.1350 | NXDN48 | WRAN954 | |
| Morgan County Fire Backup | Morgan County Fire – Tactical Channel | 151.3475 In 153.7400 | 114.8 PL | FMN | WQAI268 |
| Morgan County Fire | Morgan County Fire – Operations | 151.3700 | 612 DPL | FMN | WPXP385 |
| Washington Township (Martinsville) | Washington Township (Martinsville) – Backup | 151.4450 In 159.3750 | FMN | KNCG458 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morgan County Fire | Morgan County Fire – Operations | 151.2650 | 265 DPL | FMN | WPXP385 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morgan County EMS | I U Health Lifeline Critical Care Transport | 453.6125 In 458.6125 | CC 0 · TG 1 · SL 1 | DMR Encrypted | WQXD621 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Morgan County Fire | Morgan County Fire – Dispatch (County) | 12037 | 2f05 | D |
| Morgan County Fire | Morgan County Fire – Fire Ground (County) | 12039 | 2f07 | D |
| Morgan County Fire | Morgan County Fire – Interop (County) | 12040 | 2f08 | D |
| Morgan County Fire | Morgan County Fire – interop (County) | 12041 | 2f09 | D |
| Morgan County Fire | Morgan County Fire – North Operations (County) | 12042 | 2f0a | D |
| Morgan County Fire | Morgan County Fire – Operations (County) | 12043 | 2f0b | D |
| Morgan County Fire | Morgan County Fire – Operations (County) | 12044 | 2f0c | D |
| Morgan County Fire | Morgan County Fire – Operations (County) | 12045 | 2f0d | D |
| Morgan County Fire | Morgan County Fire – Operations (County) | 12046 | 2f0e | D |
| Morgan County Fire | Morgan County Fire – Operations (County) | 12047 | 2f0f | D |
| Morgan County Fire | Morgan County Fire – Operations (County) | 12048 | 2f10 | D |
| Morgan County Fire | Morgan County Fire – Operations (County) | 12049 | 2f11 | D |
| Morgan County Fire | Morgan County Fire – Operations (County) | 12050 | 2f12 | D |
| Morgan County Fire | Morgan County Fire – Training (County) | 12051 | 2f13 | D |
Nearest trunked radio sites
Distances are measured from the center of Baker.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Baker?
We do not have a fire dispatch channel listed specifically for Baker. The county-level fire dispatch channels in the same county: Morgan County Fire 154.3700 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Baker?
Yes. The county-level systems that cover Baker are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 14 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Baker?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48, DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Baker?
For Baker, start with the Hindustan site of Indiana Project Hoosier SAFE-T. Its control channels are 853.5875, 854.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.