Skip to content

Ashland Fire and EMS Frequencies

We do not have frequencies listed specifically for Ashland in Morgan County, Indiana yet. Countywide channels for Morgan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Martinsville (Indiana Project Hoosier SAFE-T), about 10 miles away.

About Ashland Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ashland: Morgan County Fire 154.3700 MHz, narrow FM, 114.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Morgan County Fire talkgroup 12037 (hex 2f05).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (NXDN48, DMR), which needs a scanner that decodes those modes.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ashland, start with the Martinsville site of Indiana Project Hoosier SAFE-T, about 10 miles away. Its control channels: 857.7125, 859.7125 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Morgan County channels that also cover Ashland

Fire Dispatch

Fire Dispatch frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morgan County FireMorgan County Fire – Dispatch (Simulcast on SAFE – T)154.3700
In 151.4150
114.8 PLFMNWPHZ781

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morgan County FireCounty Emergency Management/911 Dispatch151.0775
In 156.1350
NXDN48WRAN954
Morgan County Fire BackupMorgan County Fire – Tactical Channel151.3475
In 153.7400
114.8 PLFMNWQAI268
Morgan County FireMorgan County Fire – Operations151.3700612 DPLFMNWPXP385
Washington Township (Martinsville)Washington Township (Martinsville) – Backup151.4450
In 159.3750
FMNKNCG458

Fire Talk-around

Fire Talk-around frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morgan County FireMorgan County Fire – Operations151.2650265 DPLFMNWPXP385

EMS Dispatch

EMS Dispatch frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morgan County EMSI U Health Lifeline Critical Care Transport453.6125
In 458.6125
CC 0 · TG 1 · SL 1DMR EncryptedWQXD621

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Morgan County FireMorgan County Fire – Dispatch (County)120372f05D
Morgan County FireMorgan County Fire – Fire Ground (County)120392f07D
Morgan County FireMorgan County Fire – Interop (County)120402f08D
Morgan County FireMorgan County Fire – interop (County)120412f09D
Morgan County FireMorgan County Fire – North Operations (County)120422f0aD
Morgan County FireMorgan County Fire – Operations (County)120432f0bD
Morgan County FireMorgan County Fire – Operations (County)120442f0cD
Morgan County FireMorgan County Fire – Operations (County)120452f0dD
Morgan County FireMorgan County Fire – Operations (County)120462f0eD
Morgan County FireMorgan County Fire – Operations (County)120472f0fD
Morgan County FireMorgan County Fire – Operations (County)120482f10D
Morgan County FireMorgan County Fire – Operations (County)120492f11D
Morgan County FireMorgan County Fire – Operations (County)120502f12D
Morgan County FireMorgan County Fire – Training (County)120512f13D

Nearest trunked radio sites

Distances are measured from the center of Ashland.

Martinsville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 59 (hex 3B) · NAC 6B5 · about 10 mi away
Control 857.7125, 859.7125
Voice 851.4, 851.7125, 854.3125, 859.4875
Hindustan · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 17 (hex 11) · NAC 6B8 · about 14 mi away
Control 853.5875, 854.4625
Voice 851.175, 852.175, 852.675, 853.3125
Putnamville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 35 (hex 23) · NAC 6B5 · about 15 mi away
Control 852.925, 853.425, 853.925
Voice 851.425, 851.925, 852.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ashland?

We do not have a fire dispatch channel listed specifically for Ashland. The county-level fire dispatch channels in the same county: Morgan County Fire 154.3700 MHz, narrow FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Ashland?

Yes. The county-level systems that cover Ashland are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 14 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ashland?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48, DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ashland?

For Ashland, start with the Martinsville site of Indiana Project Hoosier SAFE-T. Its control channels are 857.7125, 859.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.