About Union Fire and EMS Frequencies
Quick answer: Trunked: Indiana Project Hoosier SAFE-T, for example Ohio County Fire talkgroup 21544 (hex 5428).
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Union, start with the Aurora site of Indiana Project Hoosier SAFE-T, about 4 miles away. Its control channels: 852.4, 857.2125, 858.2125 MHz.
Data updated .
Ohio County channels that also cover Union
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ohio County Fire | Ohio County Fire – Dispatch | 21544 | 5428 | D |
| Ohio County Fire | Ohio County Fire – Operations | 21545 | 5429 | D |
| Ohio County Fire | Ohio County Fire – Operations | 21546 | 542a | D |
| Ohio County EMS | Ohio County EMS – Operations | 21539 | 5423 | D |
Nearest trunked radio sites
Distances are measured from the center of Union.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Union?
Yes. The county-level systems that cover Union are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Union?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Union?
For Union, start with the Aurora site of Indiana Project Hoosier SAFE-T. Its control channels are 852.4, 857.2125, 858.2125, 859.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.