Skip to content

Raccoon Fire and EMS Frequencies

We do not have frequencies listed specifically for Raccoon in Parke County, Indiana yet. Countywide channels for Parke County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bridgeton (Indiana Project Hoosier SAFE-T), about 0 miles away.

About Raccoon Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Raccoon: County Public Safety 154.3700 MHz, narrow FM, 85.4 PL. County-level ems dispatch that covers Raccoon: County Public Safety 155.2950 MHz, narrow FM, 85.4 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Parke County Fire talkgroup 12116 (hex 2f54).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Raccoon, start with the Bridgeton site of Indiana Project Hoosier SAFE-T, about 0 miles away. Its control channels: 853.9625, 859.4875 MHz.

Data updated .

Parke County channels that also cover Raccoon

Fire Dispatch

Fire Dispatch frequencies for Parke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public SafetyCounty Public Safety – Dispatch154.370085.4 PLFMNKSH221

EMS Dispatch

EMS Dispatch frequencies for Parke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public SafetyCounty Public Safety – Dispatch155.295085.4 PLFMNKDG426

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Parke County FireParke County Fire – Dispatch121162f54D
Parke County FireParke County Fire – Fire Ground121122f50D
Parke County FireParke County Fire – Fire Ground121132f51D
Parke County FireParke County Fire – Fire Ground121142f52D
Parke County FireParke County Fire – Fire Ground121152f53D
Parke County EMSParke County EMS – Dispatch121102f4eD
Parke County EMSParke County EMS – Operations121112f4fD

Nearest trunked radio sites

Distances are measured from the center of Raccoon.

Bridgeton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 82 (hex 52) · NAC 6B2 · about 0 mi away
Control 853.9625, 859.4875
Voice 851.4625, 852.4875, 852.9875, 853.4875
Brazil · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 84 (hex 54) · NAC 6BA · about 9 mi away
Control 858.7375, 859.4625
Voice 852.4375, 857.4625, 858.4625
INDOC Rockville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 89 (hex 59) · NAC 6B4 · about 10 mi away
Control 853.2375, 859.5375
Voice 851.175
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Raccoon?

We do not have a fire dispatch channel listed specifically for Raccoon. The county-level fire dispatch channels in the same county: County Public Safety 154.3700 MHz, narrow FM, 85.4 PL.

What frequency does EMS or the ambulance service use in Raccoon?

We do not have a EMS dispatch channel listed specifically for Raccoon. The county-level EMS dispatch channels in the same county: County Public Safety 155.2950 MHz, narrow FM, 85.4 PL.

Do fire departments and EMS use a trunked radio system in Raccoon?

Yes. The county-level systems that cover Raccoon are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Raccoon?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Raccoon?

For Raccoon, start with the Bridgeton site of Indiana Project Hoosier SAFE-T. Its control channels are 853.9625, 859.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.