Skip to content

Van Buren Fire and EMS Frequencies

We do not have frequencies listed specifically for Van Buren in Clay County, Indiana yet. Countywide channels for Clay County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Brazil (Indiana Project Hoosier SAFE-T), about 4 miles away.

About Van Buren Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Van Buren: Clay County Fire/EMS 151.4000 MHz, NXDN48, RAN 18. County-level ems dispatch that covers Van Buren: Clay County Fire/EMS 158.4000 MHz, narrow FM, 155 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Clay County Fire talkgroup 10080 (hex 2760).

  • 17 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Van Buren, start with the Brazil site of Indiana Project Hoosier SAFE-T, about 4 miles away. Its control channels: 858.7375, 859.4625 MHz.

Data updated .

Clay County channels that also cover Van Buren

Fire Dispatch

Fire Dispatch frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County Fire/EMSDispatch Digital151.4000
In 159.2100
RAN 18NXDN48WPHN549
Clay County Fire/EMSOwen County VHF Fire Dispatch (Dispatches Poland Fire Department)154.1450
In 159.2850
146.2 PLFMNKZP242
Clay County Fire/EMSDispatch Analog154.4000
In 150.7900
173.8 PLFMNWPHV686

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County Fire/EMSBrazil Fire Operations151.1600
In 159.3000
114.8 PLFMNWPYW718
Clay County Fire/EMSVan Buren Twp Volunteer Fire Department Tactical153.8900173.8 PLFMNKNJG589
Clay County Fire/EMSDick Johnson Township Volunteer Fire Department Tactical154.1300FMN—
Clay County Fire/EMSPoland Fire Tactical154.2050CSQFMNKNNP549
Clay County Fire/EMSClay County Fire/EMS – Fire Ground154.2800CSQFMNKLP506
Clay County Fire/EMSCory Volunteer Fire Department Tactical154.2950FMNKJK523
Clay County Fire/EMSLewis Twp Volunteer Fire Department Tactical154.3700FMNKXO708
Clay County Fire/EMSJackson Twp Volunteer Fire Department Tactical154.4950FMN—
Clay County Fire/EMSSearch And Resuce Tactical155.0250FMNWPCI475
Clay County Fire/EMSClay County Fire/EMS – Fire Ground155.2650173.8 PLFMNKLP506
Clay County Fire/EMSBrazil Fire Tactical156.1950173.8 PLFMNKCW648

Fire Talk-around

Fire Talk-around frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County Fire/EMSFire Talkaround154.4000173.8 PLFMNWPHV686

EMS Dispatch

EMS Dispatch frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County Fire/EMSAir Evac Lifeteam – Centerpoint Dispatch158.4000
In 151.5050
155 DPLFMNWPRY891

EMS Tactical

EMS Tactical frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County Fire/EMSAir Evac Lifeteam – Centerpoint Tactical158.2200032 DPLFMNWQCD342

Hospitals & Medical

Hospitals & Medical frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County Fire/EMSIHERN (Patient Reports to ER)155.3400210.7 PLFMNKLP506

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Clay County FireCounty Fire – Dispatch100802760D
Clay County FireCounty Fireground100822762D
Clay County FireCounty Fireground100832763D
Clay County FireCounty Fireground100852765D
Clay County EMSClay County EMS – Dispatch(Reserved for County EMS)10093276dD

Nearest trunked radio sites

Distances are measured from the center of Van Buren.

Brazil · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 84 (hex 54) · NAC 6BA · about 4 mi away
Control 858.7375, 859.4625
Voice 852.4375, 857.4625, 858.4625
Bridgeton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 82 (hex 52) · NAC 6B2 · about 8 mi away
Control 853.9625, 859.4875
Voice 851.4625, 852.4875, 852.9875, 853.4875
Putnamville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 35 (hex 23) · NAC 6B5 · about 10 mi away
Control 852.925, 853.425, 853.925
Voice 851.425, 851.925, 852.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Van Buren?

We do not have a fire dispatch channel listed specifically for Van Buren. The county-level fire dispatch channels in the same county: Clay County Fire/EMS 151.4000 MHz, NXDN48, RAN 18.

What frequency does EMS or the ambulance service use in Van Buren?

We do not have a EMS dispatch channel listed specifically for Van Buren. The county-level EMS dispatch channels in the same county: Clay County Fire/EMS 158.4000 MHz, narrow FM, 155 DPL.

Do fire departments and EMS use a trunked radio system in Van Buren?

Yes. The county-level systems that cover Van Buren are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Van Buren?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Van Buren?

For Van Buren, start with the Brazil site of Indiana Project Hoosier SAFE-T. Its control channels are 858.7375, 859.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.