About Washington Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Washington: Putnam County Fire/EMS 151.4750 MHz, narrow FM, 186.2 PL. County-level ems dispatch that covers Washington: Putnam County Fire/EMS 155.2200 MHz, narrow FM, 100.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Putnam County Fire talkgroup 12159 (hex 2f7f).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Washington, start with the Putnamville site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 852.925, 853.425, 853.925 MHz.
Data updated .
Putnam County channels that also cover Washington
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Putnam County Fire/EMS | Fillmore Floyd Township Volunteer Fire Department Dispatch | 151.4750 In 153.9350 | 186.2 PL | FMN | WQAZ414 |
| Putnam County Fire/EMS | County Fire – Dispatch | 154.3850 | 186.2 PL | FMN | WPJI578 |
| Putnam County Fire/EMS | Cloverdale Township Fire | 154.4150 | 114.8 PL | FMN | KLF716 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Putnam County Fire/EMS | Walnut Township Fire and EMS | 151.1900 | 186.2 PL | FMN | WQRL912 |
| Putnam County Fire/EMS | Emergency Management (EMA w/Putnam Co CERT Team) | 155.7000 In 159.2100 | 192.8 PL | FMN | WQOY685 |
| Putnam County Fire/EMS | 911 Standby Repeater | 854.0125 In 809.0125 | 156.7 PL | FMN | WQON322 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Putnam County Fire/EMS | Operation Life EMS – Dispatch | 155.2200 | 100.0 PL | FMN | KEK746 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Putnam County Fire/EMS | Operation Life EMS – Operations | 463.1750 In 468.1750 | 151.4 PL | FMN | KEK746 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Putnam County Fire | County Fire Dispatch | 12159 | 2f7f | D |
| Putnam County Fire | County Fireground | 12155 | 2f7b | D |
| Putnam County Fire | County Fireground | 12156 | 2f7c | D |
| Putnam County Fire | County Fireground | 12157 | 2f7d | D |
| Putnam County Fire | County Fireground | 12158 | 2f7e | D |
| Putnam County Fire | County Fireground | 12170 | 2f8a | D |
| Putnam County EMS | EMS to County Hospital | 12163 | 2f83 | D |
| Putnam County EMS | County EMS Operations | 12164 | 2f84 | D |
| Putnam County EMS | County EMS Operations | 12165 | 2f85 | D |
Nearest trunked radio sites
Distances are measured from the center of Washington.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Washington?
We do not have a fire dispatch channel listed specifically for Washington. The county-level fire dispatch channels in the same county: Putnam County Fire/EMS 151.4750 MHz, narrow FM, 186.2 PL.
What frequency does EMS or the ambulance service use in Washington?
We do not have a EMS dispatch channel listed specifically for Washington. The county-level EMS dispatch channels in the same county: Putnam County Fire/EMS 155.2200 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Washington?
Yes. The county-level systems that cover Washington are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Washington?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Washington?
For Washington, start with the Putnamville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.925, 853.425, 853.925 MHz. Program a control channel first; the scanner finds the voice channels from it.