Skip to content

Jackson Fire and EMS Frequencies

We do not have frequencies listed specifically for Jackson in Owen County, Indiana yet. Countywide channels for Owen County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Putnamville (Indiana Project Hoosier SAFE-T), about 10 miles away.

About Jackson Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Jackson: Owen County Fire/EMS 154.1450 MHz, narrow FM, 146.2 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Owen County Fire talkgroup 21565 (hex 543d).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jackson, start with the Putnamville site of Indiana Project Hoosier SAFE-T, about 10 miles away. Its control channels: 852.925, 853.425, 853.925 MHz.

Data updated .

Owen County channels that also cover Jackson

Fire Dispatch

Fire Dispatch frequencies for Owen County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Owen County Fire/EMSCounty Fire154.1450
In 159.2850
146.2 PLFMNKZP242

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Owen County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Owen County Fire/EMSOwen Valley Fire154.3400FMNWNVK654

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Owen County FireOwen County Fire – Dispatch21565543dD
Owen County FireOwen County Fire – Fire Ground21566543eD
Owen County FireOwen County Fire – Fire Ground21567543fD
Owen County FireOwen County Fire – Fire Ground215685440D
Owen County EMSOwen County EMS – Operations215615439D
Owen County EMSOwen County EMS – Operations21562543aD
Owen County EMSOwen County EMS – Operations21563543bD

Nearest trunked radio sites

Distances are measured from the center of Jackson.

Putnamville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 35 (hex 23) · NAC 6B5 · about 10 mi away
Control 852.925, 853.425, 853.925
Voice 851.425, 851.925, 852.875
Spencer · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 60 (hex 3C) · NAC 6BA · about 10 mi away
Control 853.3625, 853.5625
Voice 851.9875, 852.8625, 854.0625
Brazil · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 84 (hex 54) · NAC 6BA · about 14 mi away
Control 858.7375, 859.4625
Voice 852.4375, 857.4625, 858.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Jackson?

We do not have a fire dispatch channel listed specifically for Jackson. The county-level fire dispatch channels in the same county: Owen County Fire/EMS 154.1450 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Jackson?

Yes. The county-level systems that cover Jackson are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Jackson?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Jackson?

For Jackson, start with the Putnamville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.925, 853.425, 853.925 MHz. Program a control channel first; the scanner finds the voice channels from it.