About Anderson Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Anderson: Central Perry Fire 154.3850 MHz, narrow FM, 107.2 PL; County EMS/EMA 154.1000 MHz, narrow FM, 203.5 PL; Perry County Fire 156.2400 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Anderson: Perry County EMS 458.0500 MHz, narrow FM, 263 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Perry County Fire talkgroup 21576 (hex 5448).
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Anderson, start with the Leopold site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 853.45, 853.975 MHz.
Data updated .
Perry County channels that also cover Anderson
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Central Perry Fire | Central Perry Fire – Dispatch | 154.3850 In 156.0000 | 107.2 PL | FMN | KNNI807 |
| County EMS/EMA | County EMS/EMA | 154.1000 In 158.8950 | 203.5 PL | FMN | KNBQ225 |
| Perry County Fire | County Fire – Dispatch | 156.2400 In 153.7850 | 141.3 PL | FMN | WPUD447 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Anderson Township Fireground Fire | Anderson Township Fireground | 154.3100 | FMN | WNUA925 | |
| Perry County Fire | Tell City/Cannelton/Troy Fireground | 156.0450 | FMN | WPUD447 | |
| Rome Fireground Fire | Rome Fireground | 154.1900 | FMN | WPCD816 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Perry County EMS | Perry County EMS – Remote Receiver Site Link | 458.0500 | 263 DPL | FMN | KNBQ225 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Perry County EMS | Perry County EMS – MEDCOM | 155.2800 | FMN | WPMQ769 | |
| Perry County EMS | Perry County EMS – MEDCOM | 155.2950 | FMN | WPMQ769 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Perry County Hospital | Perry County Hospital – IHERN | 155.3400 | 100.0 PL | FMN | WPMQ769 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Perry County Fire | Perry County Fire – Dispatch | 21576 | 5448 | D |
| Perry County Fire | Perry County Fire – Fire Ground | 21577 | 5449 | D |
| Perry County Fire | Perry County Fire – Fire Ground | 21578 | 544a | D |
| Perry County Fire | Perry County Fire – Fire Ground | 21579 | 544b | D |
| Perry County EMS | Perry County EMS – Tactical Channel | 21575 | 5447 | D |
Nearest trunked radio sites
Distances are measured from the center of Anderson.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Anderson?
We do not have a fire dispatch channel listed specifically for Anderson. The county-level fire dispatch channels in the same county: Central Perry Fire 154.3850 MHz, narrow FM, 107.2 PL; County EMS/EMA 154.1000 MHz, narrow FM, 203.5 PL; Perry County Fire 156.2400 MHz, narrow FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Anderson?
We do not have a EMS dispatch channel listed specifically for Anderson. The county-level EMS dispatch channels in the same county: Perry County EMS 458.0500 MHz, narrow FM, 263 DPL.
Do fire departments and EMS use a trunked radio system in Anderson?
Yes. The county-level systems that cover Anderson are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Anderson?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Anderson?
For Anderson, start with the Leopold site of Indiana Project Hoosier SAFE-T. Its control channels are 853.45, 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.