Skip to content

Oil Fire and EMS Frequencies

We do not have frequencies listed specifically for Oil in Perry County, Indiana yet. Countywide channels for Perry County that may also cover this area are shown below when we have them. The closest trunked radio site we have is INDOC Branchville (Indiana Project Hoosier SAFE-T), about 3 miles away.

About Oil Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Oil: Central Perry Fire 154.3850 MHz, narrow FM, 107.2 PL; County EMS/EMA 154.1000 MHz, narrow FM, 203.5 PL; Perry County Fire 156.2400 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Oil: Perry County EMS 458.0500 MHz, narrow FM, 263 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Perry County Fire talkgroup 21576 (hex 5448).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Oil, start with the INDOC Branchville site of Indiana Project Hoosier SAFE-T, about 3 miles away. Its control channels: 857.2375, 858.2375 MHz.

Data updated .

Perry County channels that also cover Oil

Fire Dispatch

Fire Dispatch frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Central Perry FireCentral Perry Fire – Dispatch154.3850
In 156.0000
107.2 PLFMNKNNI807
County EMS/EMACounty EMS/EMA154.1000
In 158.8950
203.5 PLFMNKNBQ225
Perry County FireCounty Fire – Dispatch156.2400
In 153.7850
141.3 PLFMNWPUD447

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anderson Township Fireground FireAnderson Township Fireground154.3100FMNWNUA925
Perry County FireTell City/Cannelton/Troy Fireground156.0450FMNWPUD447
Rome Fireground FireRome Fireground154.1900FMNWPCD816

EMS Dispatch

EMS Dispatch frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Perry County EMSPerry County EMS – Remote Receiver Site Link458.0500263 DPLFMNKNBQ225

EMS Tactical

EMS Tactical frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Perry County EMSPerry County EMS – MEDCOM155.2800FMNWPMQ769
Perry County EMSPerry County EMS – MEDCOM155.2950FMNWPMQ769

Hospitals & Medical

Hospitals & Medical frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Perry County HospitalPerry County Hospital – IHERN155.3400100.0 PLFMNWPMQ769

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Perry County FirePerry County Fire – Dispatch215765448D
Perry County FirePerry County Fire – Fire Ground215775449D
Perry County FirePerry County Fire – Fire Ground21578544aD
Perry County FirePerry County Fire – Fire Ground21579544bD
Perry County EMSPerry County EMS – Tactical Channel215755447D

Nearest trunked radio sites

Distances are measured from the center of Oil.

INDOC Branchville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 78 (hex 4E) · NAC 6B8 · about 3 mi away
Control 857.2375, 858.2375
Voice 856.2375
St. Meinrad · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 58 (hex 3A) · NAC 6B6 · about 6 mi away
Control 853.6875, 853.9375
Voice 851.2375, 851.4125, 852.925
Leopold · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 27 (hex 1B) · NAC 6B2 · about 9 mi away
Control 853.45, 853.975
Voice 851.375, 851.9, 852.425, 859.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Oil?

We do not have a fire dispatch channel listed specifically for Oil. The county-level fire dispatch channels in the same county: Central Perry Fire 154.3850 MHz, narrow FM, 107.2 PL; County EMS/EMA 154.1000 MHz, narrow FM, 203.5 PL; Perry County Fire 156.2400 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Oil?

We do not have a EMS dispatch channel listed specifically for Oil. The county-level EMS dispatch channels in the same county: Perry County EMS 458.0500 MHz, narrow FM, 263 DPL.

Do fire departments and EMS use a trunked radio system in Oil?

Yes. The county-level systems that cover Oil are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Oil?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Oil?

For Oil, start with the INDOC Branchville site of Indiana Project Hoosier SAFE-T. Its control channels are 857.2375, 858.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.